Crow FW2-SIREN2CP-8/9F Manual de instalación - Página 4
Navegue en línea o descargue pdf Manual de instalación para Sistema de seguridad Crow FW2-SIREN2CP-8/9F. Crow FW2-SIREN2CP-8/9F 19 páginas. Siren system
Imprimir página
Introduction
General Description
The FW2 Siren can be assigned in Runner2 series or SERENITY control panels. Siren
programming instruction for Runner2 and SERENITY either, will be described on the next
pages. FW2 Siren for Runner2 requires the FW2‐TRANS installed in the Runner box which is
connected to the Runner communication bus connector on board. For the SERENITY, the
FW2 Siren communicates with RF module which is plugged on the SERENITY Board.
The FW2 Siren unit can be powered by Lithium Battery 3.6V/14Ah or by external power
supply 12V/0.8A or both.
FW2 Siren Introduction to RUNNER2
RUNNER 2 contains The FW2-TRANS which is an advanced product that adds support 2way
wireless devices for the "CROW-RUNNER 2" alarm systems.
FW2-TRANS include integrated RF transceiver and an interface with the runner BUS system.
The use of FW2-TRANS will enable the user to get back compatibly with FW 1 way wireless
devices together with the supreme 2way wireless line of devices that uses an advanced
2way RF transceiver combined with an intelligent communication protocol and a unique 24
bit ID number.
FW2-TRANS can be installed in selected runner system case or in an external box while
protected by the on boards tamper
NOTE: For more information on FW2-TRANS please refer to FW2-TRANS document.
Figure 1
2