Crow FW2-SIREN2CP-8/9F Manuale di installazione - Pagina 4

Sfoglia online o scarica il pdf Manuale di installazione per Sistema di sicurezza Crow FW2-SIREN2CP-8/9F. Crow FW2-SIREN2CP-8/9F 19. Siren system

Introduction

The FW2 Siren can be assigned in Runner2 series or SERENITY control panels. Siren

programming instruction for Runner2 and SERENITY either, will be described on the next

pages. FW2 Siren for Runner2 requires the FW2‐TRANS installed in the Runner box which is

connected to the Runner communication bus connector on board. For the SERENITY, the

FW2 Siren communicates with RF module which is plugged on the SERENITY Board.

The FW2 Siren unit can be powered by Lithium Battery 3.6V/14Ah or by external power

supply 12V/0.8A or both.

RUNNER 2 contains The FW2-TRANS which is an advanced product that adds support 2way

wireless devices for the "CROW-RUNNER 2" alarm systems.

FW2-TRANS include integrated RF transceiver and an interface with the runner BUS system.

The use of FW2-TRANS will enable the user to get back compatibly with FW 1 way wireless

devices together with the supreme 2way wireless line of devices that uses an advanced

2way RF transceiver combined with an intelligent communication protocol and a unique 24

bit ID number.

FW2-TRANS can be installed in selected runner system case or in an external box while

protected by the on boards tamper

NOTE: For more information on FW2-TRANS please refer to FW2-TRANS document.

Figure 1