Epson Stylus Color 900 Manual del usuario - Página 7

Navegue en línea o descargue pdf Manual del usuario para Accesorios para impresoras Epson Stylus Color 900. Epson Stylus Color 900 40 páginas. For windows and macintosh
También para Epson Stylus Color 900: Especificaciones (2 páginas), Manual Start Here (12 páginas), Boletín de asistencia sobre productos (6 páginas), Boletín de asistencia sobre productos (1 páginas), Manual de información del producto (13 páginas), Hoja de información del producto (4 páginas), Boletín de asistencia sobre productos (3 páginas), Boletín de asistencia sobre productos (2 páginas), Boletín de asistencia sobre productos (4 páginas), Boletín de asistencia sobre productos (7 páginas), Manual en línea (12 páginas)

Character table

Character tables contain the characters and symbols used in different

languages. The printer prints text based on the selected character

table. For the available character tables, see "Character Tables" on

page 28.

Auto line feed

When the Auto line feed feature is on, each carriage return (CR) code

is accompanied by a line feed (LF) code. If your printed text is

unexpectedly double-spaced, set this feature to Off. If text lines print

on top of each other, set it to On.

Network I/F mode

If your printer is connected to a single computer, leave this feature

off. If you want to share the printer with another computer, turn this

feature on. When this feature is on, data may be present in the

printer's buffer even though the printer is not printing. Always make

sure the printer does not receive data before turning off the printer.

Loading position

If you want to print more lines on a page, set this feature to 3 mm. If

you set the top margin with your software, that setting is added to

the default-setting value.

0 slash

If you want to use the zero character which has a slash, set this feature

to 0 with slash. The slash allows you to easily distinguish between

an uppercase letter "O" and a zero.

Parallel I/F transfer rate

This setting specifies the interface transfer rate. For most printing,

leave this setting set to Fast. If you encounter problems, set it to

Normal.