Dillon ED-2000plus Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Instrumentos de medida Dillon ED-2000plus. Dillon ED-2000plus 20 páginas. Electronic dynamometer with hr-2000 remote

Imprimir página

Battery Replacement

ED-2000plus connected to

an HR-2000 by wire

receives power from the

HR-2000. A battery is not

recommended in the

ED-2000plus in this

situation.

The HR-2000 does not contain

a low battery detector. It merely

displays the low battery warning

from the loadcell. Because of

this, change batteries in both

the ED-2000plus and HR-2000

when the battery warning lights

up. (Radio-Link systems only)

When the low battery annunciator appears, you have approximately five hours

of usage left. To change the nine-volt battery in the ED-2000plus, follow these

steps:

1. Remove the two knurled thumb screws from the battery compartment

cover. (Be careful not to lose these screws.) See Figure 6.

Battery compartment cover

2. Remove the battery compartment cover.

3. Slide the battery down and pry the free end of the battery out of the

compartment opening. See Figure 7.

4. Pull the battery out of the compartment and disconnect the battery from

the battery lead.

5. Connect new battery to the lead and reverse the disassembly procedure.

Figure 6

Figure 7

Battery removal