Epson 2090 - LQ B/W Dot-matrix Printer Manual del usuario - Página 27
Navegue en línea o descargue pdf Manual del usuario para Software Epson 2090 - LQ B/W Dot-matrix Printer. Epson 2090 - LQ B/W Dot-matrix Printer 48 páginas. Epson lq-2090: product brochure
También para Epson 2090 - LQ B/W Dot-matrix Printer: Manual (11 páginas), Resumen técnico (7 páginas), Especificaciones (2 páginas)
Imprimir página
1.
Make sure the paper guide is in the upright position. Then set the
paper-thickness lever to 0 if you are using ordinary single-sheet
paper. (If you are using envelopes, see "Envelopes" on page 30.)
2.
Move the paper release lever to the single-sheet position.
3.
Turn on the printer, if necessary.
4.
Slide the left edge guide
until it locks in place next
to the triangle mark on the
paper guide. Next adjust
the right edge guide to
match the width of your
paper.
5.
Load a sheet of paper with
the printable side down and
slide it down between the edge
guides until it meets
resistance. The printer feeds
the paper automatically and is
ready to print.
If the first printed line on your page appears too high or low, you can use
the Micro Adjust function to adjust the top-of-form position. See page 33
for more information.
Paper Handling
27