Epson 2090 - LQ B/W Dot-matrix Printer Panduan Pengguna - Halaman 27
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat lunak Epson 2090 - LQ B/W Dot-matrix Printer. Epson 2090 - LQ B/W Dot-matrix Printer 48 halaman. Epson lq-2090: product brochure
Juga untuk Epson 2090 - LQ B/W Dot-matrix Printer: Manual (11 halaman), Ringkasan Teknis (7 halaman), Spesifikasi (2 halaman)
Halaman Cetak
1.
Make sure the paper guide is in the upright position. Then set the
paper-thickness lever to 0 if you are using ordinary single-sheet
paper. (If you are using envelopes, see "Envelopes" on page 30.)
2.
Move the paper release lever to the single-sheet position.
3.
Turn on the printer, if necessary.
4.
Slide the left edge guide
until it locks in place next
to the triangle mark on the
paper guide. Next adjust
the right edge guide to
match the width of your
paper.
5.
Load a sheet of paper with
the printable side down and
slide it down between the edge
guides until it meets
resistance. The printer feeds
the paper automatically and is
ready to print.
If the first printed line on your page appears too high or low, you can use
the Micro Adjust function to adjust the top-of-form position. See page 33
for more information.
Paper Handling
27