Epson Expression 1600 Manual de instalación

Imprimir página

Epson Expression 1600 Manual de instalación

Epson Expression 1600 Scanner Setup

Unlocking Scanner and Transparency Adapter

Make sure your scanner and transparency adapter are unlocked. They should only be locked for storage or transport.

Unpack the scanner and attach the transparency adapter. Plug in the scanner and attach the cable from the scanner

to the appropriate port (FireWire, USB, or SCSI) on the computer or USB hub. If you purchased your computer

through Quick Ceph Systems, the scanner software will be installed and ready to use. Skip the software installation

section and go to "Setting Up The Scanner Interface".

Installing Scanner Software

Now that you have connected the

scanner to the computer, it is time

to install the scanner software.

Insert the "Scanning Tools" CD-

ROM found on

the back of the

Expression man-

ual. An icon will

appear on your

desktop. Double

click on this icon.

After the initial installation, the

Epson Screen Calibration applica-

tion will automatically open. Use

the arrows to adjust the image until

the two gray colors match each

other. Epson recommends a setting

of 1.8.

Open the Adobe Photoshop 5.0 LE

folder when the computer has

rebooted. Click once on the appli-

cation icon to select it. Go to the

File menu and select "Make Alias".

The computer will make an "alias"

(or "Shortcut") of the Photoshop

program. Place this alias on the

desktop.

http://www.quickceph.com/docs/1030Expression_Setup.pdf

The folder shown to the

right will open. Double

click on the icon labeled

"EPSON TWAIN Pro".

Click on the appropriate

language and then click

on the installer icon to

install the TWAIN soft-

ware. Click on "Restart"

when prompted.

Create a new folder on

the desktop by clicking on

the File menu an select-

ing "New Folder".

Rename the "Untitled

Folder" to "Scanned

Images". This folder will

be used to contain your

scanned X-rays.

You should also create

and place an alias of the

Quick Ceph program on

the desktop.

Page 1

Quick Ceph

When the computer boots up again, place the

PhotoShop LE CD-ROM into the computer to

install the software. Locate the Adobe

Photoshop 5.0 LE folder. Double click on this

folder and locate the "Install Photoshop® LE"

icon. Double click to install. Follow the installa-

tion directions, and restart when prompted.

Your desktop should resemble

the one shown above when the

software installation has concluded.

Doc ID# 1030Expression_Setup - Revision 12-1-00

Systems