Epson Expression 1600 Manual de instalación - Página 4

Imprimir página

Epson Expression 1600 Manual de instalación

Epson Expression 1600 Scanner Setup

Scanning with the Epson Expression

After the settings are correct, you

should create a custom setting for

Quick Ceph. Click on the "Settings"

button circled below. The window

shown to the right will open.

Once the settings have been

selected, you can click on the

"Scan" button to begin scan-

ning. The scanner will place

the scanned image on the

screen.

If the image is satisfactory, proceed to step 4.

Otherwise, close the window and make further adjust-

ments to the image before scanning again.

After the images have been saved, you can drag and

drop them onto Quick Ceph. You should create a

Quick Ceph alias icon on your desktop for easier

access.

Quick Scanning Tutorial

Once you have saved the scanner settings, scanning will become much faster. You will not have to reinput the settings.

Follow the instructions below for quick scanning instructions.

Open the Photoshop application. Go to the File menu

and select "Import", then "Twain Acquire". Click on the

"Preview" button on the window that appears.

The scanner will bring up a pre-

viewed image on the screen.

The resolution, Source, and

Target settings will be reset to

the default settings.

The settings should change to the correct values for

Quick Ceph. You can then adjust the image using

either the Image Controls or the Tone Correction fea-

tures. When the image is satisfactory, click on the

"Scan" button.

After the image is scanned, you can drag and drop it

onto Quick Ceph .

http://www.quickceph.com/docs/1030Expression_Setup.pdf

Quick Ceph

Type in the name you would like to

call this setting, then click on Save,

as shown below. The dimensions,

resolution, and image changes will

be saved in this setting.

Click on the File menu and select "Save As". A

save dialog box will open. You should save all

scanned files to the "Scanned Images" folder on

the desktop.

Patient Name, lateral

We recommend naming the files with the name

of the patient, followed by the type of x-ray. This

allows for easier identification.

Click on the

"Settings" icon and

select the name of

the saved settings.

In this case, we will

choose "Quick

Ceph Image Pro

Settings". Once

selected, click on

"OK".

For more information about dragging and dropping x-rays

onto Quick Ceph, please consult the User Manual.

Page 4

Doc ID# 1030Expression_Setup - Revision 12-1-00

Systems