Epson PowerLite 1760W Manual de instalación

Navegue en línea o descargue pdf Manual de instalación para Software Epson PowerLite 1760W. Epson PowerLite 1760W 4 páginas. Epson powerlite
También para Epson PowerLite 1760W: Manual de introducción (9 páginas), Manual de instrucciones (47 páginas), Manual de configuración rápida (4 páginas), Manual de instrucciones (20 páginas), Manual del usuario (25 páginas), Manual de instrucciones (50 páginas), Declaración de conformidad (4 páginas), Manual de mantenimiento (2 páginas), Folleto y especificaciones (4 páginas)

Epson PowerLite 1750 / 1760W / 1770W / 1775W

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury.

4. Slide the lamp cover out and lift it off.

INSTALLATION HANDBOOK

Lamp and Status Information