Epson PowerLite 1760W Installation Handbook

Browse online or download pdf Installation Handbook for Software Epson PowerLite 1760W. Epson PowerLite 1760W 4 pages. Epson powerlite
Also for Epson PowerLite 1760W: Getting Started Manual (9 pages), Operation Manual (47 pages), Quick Setup Manual (4 pages), Operation Manual (20 pages), User Manual (25 pages), Operation Manual (50 pages), Declaration Of Conformity (4 pages), Maintenance Manual (2 pages), Brochure & Specs (4 pages)

Print Page

Epson PowerLite 1750 / 1760W / 1770W / 1775W

Replacing the Lamp

Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot.

Warning: Let the lamp fully cool before replacing it to avoid injury.

You can replace the lamp while the projector is mounted to the ceiling, if necessary.

1. Turn off the projector and unplug the power cord.

2. Allow the projector lamp to cool down for at least one hour.

3. Use the screwdriver included with the replacement lamp to loosen the screw securing the lamp

cover.

Warning: If the lamp is broken, glass fragments may be loose inside the lamp chamber. Be careful

removing any broken glass to avoid injury.

4. Slide the lamp cover out and lift it off.

INSTALLATION HANDBOOK

Lamp and Status Information