ECKey EK6 series Manual del instalador - Página 5

Navegue en línea o descargue pdf Manual del instalador para Controladores de acceso IP ECKey EK6 series. ECKey EK6 series 9 páginas. Internal/external mounting – red and green led control from access control system
También para ECKey EK6 series: Manual de instalación y funcionamiento (15 páginas)

Imprimir página
Administration from the ECKey Management application
The recommended approach for configuring and administrating ECKey is to use the ECKey Management Application on a Windows XP
or a Vista computer connected to the ECKey unit via a USB cable or Bluetooth. If the computer is not near the ECKey unit a Bluetooth
phone can be used to send and retrieve the configuration settings, audit trail and list of paired phones.
Unlock/open without making the phone discoverable.
The phone must be discoverable to unlock the door with the EK6.
Factory reset with the Master PIN
You will need a paired phone to unlock the door or open the gate.
1)
When the Wiegand message has been triggered and the Status Light is blue; press and release the Administration Button 4 times and then press
the Administration Button a fifth time and hold for 3 seconds.
2)
After 3 seconds the Status Light will start repeated flashing 4 times. Continue to hold for a total of 9 seconds until the Status Light starts repeated
flashing 8 times. Release the Administration Button.
3)
ECKey is currently pending a factory reset of all settings and PIN numbers. You can now;
a.
Confirm the factory reset: press and hold the Administration Button for 3 seconds. The Status Light will turn solid blue for 5 seconds to
confirm that all settings have been returned to the factory defaults. Release the Administration Button.
b.
Cancel the factory reset: press and release the Administration Button.
4)
ECKey will return to normal operating mode and the Status Light will return to slowly flashing blue.
Range Tuning
ECKey has a number of options for range tuning.
1)
The range is calibrated during pairing if used. Ensure you pair your phone at a distance of 3 feet or 1 meter from the reader to obtained the
published ranges.
2)
ECKey uses both speed and distance to measure the range. ECKey detects a phone at 10m and then monitors coming nearer. When testing the
range, ensure that you start from more that 10m away as you would when you arrive. Similarly test at normal enter speed. The slower you walk
up to the ECKey unit, the longer it will take ECKey to unlock.
3)
Ensure the Range setting to the value appropriate for most phones.
4)
Consider the environment the door or gate is installed in. Line of sight will increase the range, wood, glass and dry wall will have little effect.
Concrete and metal will reduce the range. Enclosed metal boxes will all but block the signal.

Command files

ECKey can be administered from a Bluetooth phone or device that supports file transfer. Note that the ECKey unit must be in
Administration Mode to process these files.
Generate command files
Command files to update settings can be generated from the Management Application.
1)
From the Management Application open a reader and click "Apply Settings" and select either
a.
Transfer configuration settings via Bluetooth to a phone or PDA to transfer to ECKey at a later time
b.
Save the configuration settings to a file on this computer to be applied to ECKey at a later time.
2)
If the command file is saved to a computer it can be distributed via email or edited to adjust the settings.
Download command files
3)
Register on the support section of
4)
Open the knowledge base, select the model and open the article on Command Files. This article contains text command files that can be sent to
the ECKey units to manage them from your Bluetooth phone or device.
5)
Download the command files and transfer them (via Bluetooth or other means) to the Bluetooth device you will use to administer ECKey.
Commands available include the following.
a.
Retrieve settings.
b.
Update one or more settings
Administration Mode
In normal operating mode, ECKey cannot be searched for, connected to or configured. To administer ECKey from a phone or computer via Bluetooth,
the ECKey unit must first be in Administration Mode.
To enter Administration Mode, you will need a phone that can unlock/open ECKey
1)
When the Wiegand message has been triggered and the Status Light is blue; press and release the Administration Button three times and then
press the Administration Button a fourth time and hold for 3 seconds.
2)
The Status Light will start triple flashing blue repeatedly. Release the Administration Button. While the Status Light is triple flashing blue, the
ECKey unit is in Administration Mode.
3)
ECKey will time out of Administration Mode after 60 seconds. To exit Administration Mode manually, press and release the Administration Button.
Send Command File to ECKey
1)
Enter Administration Mode on the ECKey unit (see above).
2)
Select the required Command File (see above) on the phone and select Send via Bluetooth. The phone will search for Bluetooth devices and find
ECKey. Select ECKey on your phone and when prompted, enter the Master PIN.
3)
The Command File will be transmitted to the ECKey unit. ECKey will read the commands and execute them.
4)
Some Command Files such as getting settings involve a response. In this case ECKey will generate the required file and send it to back to the
phone.
www.ECKey.com
using the product number of your ECKey unit (e.g. EK6-0C-0001000).
Model: EK6 Install Guide