Epson PowerLite 735c Manual de configuración rápida

Imprimir página

EPSON

PowerLite

Quick Setup

Turn On the Projector

Connect the power cord to

the back of the projector

and plug the other end into

a grounded outlet.

Remove the lens cover.

Locate the projector's remote control.

Before using it for the first time, pull

out the plastic tape from the battery

tray (you don't have to open the tray).

Aim the remote control at the

Page down

projector and press the red

Power

button. The

Power light flashes

Comp/EasyMP

green and the projector lamp comes

on in about 40 seconds.

Auto

Adjust the Image

To raise the image, press the blue foot release buttons on each side

of the projector and lift the front. Release the buttons to lock the

feet in position.

You can fine-tune the height by rotating the feet.

735c

Rotate the focus ring to sharpen the image.

Rotate the zoom ring to reduce or enlarge the image.

Focus ring

Zoom ring

If your image looks like

to one side of the screen at an angle. Place it directly in front of the

center of the screen, facing the screen squarely.

If your image looks like

Keystone button on the projector.

Choose a

Presentation Method

How do you want to get images to the projector?

Power

Page up

Power button

S-Video/Video Color Mode

A/V Mute

Freeze

E-Zoom

Enter

For details on any of these topics, see your User's Guide.

ESC

If connecting a computer...

Make sure you've turned on the projector and adjusted the image

as described at left.

Locate the VGA cable that came with the projector. Connect one end

to the projector's Computer/Component Video port.

Connect the other end to your laptop's video-out port. (If you're using

a desktop model, first disconnect the monitor cable from the computer,

then plug in the projector cable.)

continued

Keystone

button

, you've placed the projector off

, press the

side of the

To connect computer or video equipment,

see the instructions below and on the right.

To project over an 802.11b network, see

"If projecting wirelessly" on the back of this sheet.

To give a presentation stored on a memory card,

see Chapter 5 in your User's Guide.

continued

Press the Comp/EasyMP button on the remote control until your

computer image is displayed.

Power

Page down

Page up

Comp/EasyMP

S-Video/Video Color Mode

Comp/EasyMP button

If you're using a laptop and you see a blank screen, you may need to

adjust its display settings:

Windows

Hold down the Fn button on the keyboard and press the

function key that lets you display on an external monitor. It may have

an icon such as

, or it may be labeled CRT/LCD. You may have to

use the Display utility in the Control Panel to enable both the LCD

screen and the external monitor port.

Macintosh

OS 9 or earlier:

From the Apple menu, select Control

Panels, then click Monitors or Monitors and Sound. Click the

Arrange icon, then drag one monitor icon on top of the other;

this lets you display on both the projection screen and the LCD

screen. If this option isn't available, click the Monitor icon and

select a Simulscan resolution.

Click here

Macintosh OS X:

From the Apple menu, select System Preferences,

then click Displays. Select the VGA Display or Color LCD dialog box,

click the Arrange (or Arrangement) tab, and make sure Mirror

Displays is checked.

If you see an image but it's not displayed correctly, press the Auto

button on the remote control to automatically readjust it.

If connecting video equipment...

Make sure you've turned on the projector and adjusted the image

as described on the far-left.

Locate the RCA-style video cable that came with the projector.

Connect one end to the projector's Video port.

Connect the other end to the video-output connector on your

video equipment.

Press the S-Video / Video button on the remote control until your

video image is displayed.

Power

Page down

Page up

Comp/EasyMP

S-Video/Video Color Mode

S-Video/Video button

Drag one monitor

icon onto the other