Epson PowerLite 735c Manual de configuração rápida

Procurar online ou descarregar pdf Manual de configuração rápida para Software Epson PowerLite 735c. Epson PowerLite 735c 2 páginas. Release of check tool for network projectors v1.00 for windows
Também para Epson PowerLite 735c: Manual do utilizador (42 páginas), Manual de operação (36 páginas), Manual do utilizador (29 páginas), Especificações (2 páginas), Manual de operação (47 páginas), Informações sobre o produto (14 páginas), Lista de peças (1 páginas), Boletim de apoio ao produto (30 páginas), Manual de instalação (19 páginas), Boletim de apoio ao produto (25 páginas), Boletim de apoio ao produto (38 páginas), Boletim de apoio ao produto (12 páginas), Boletim de apoio ao produto (42 páginas), Boletim de apoio ao produto (22 páginas), Boletim de apoio ao produto (28 páginas), Boletim de apoio ao produto (41 páginas), Boletim de apoio ao produto (34 páginas), Boletim de apoio ao produto (38 páginas), Boletim de apoio ao produto (28 páginas), Boletim de apoio ao produto (15 páginas), Boletim de apoio ao produto (22 páginas)

Imprimir página
Epson PowerLite 735c Manual de configuração rápida
EPSON
®
PowerLite

Quick Setup

1

Turn On the Projector

1
Connect the power cord to
the back of the projector
and plug the other end into
a grounded outlet.
2
Remove the lens cover.
3
Locate the projector's remote control.
Before using it for the first time, pull
out the plastic tape from the battery
tray (you don't have to open the tray).
4
Aim the remote control at the
Page down
projector and press the red
Power
button. The
Power light flashes
Comp/EasyMP
green and the projector lamp comes
Menu
on in about 40 seconds.
Auto
2

Adjust the Image

1
To raise the image, press the blue foot release buttons on each side
of the projector and lift the front. Release the buttons to lock the
feet in position.
You can fine-tune the height by rotating the feet.
®
735c
2
Rotate the focus ring to sharpen the image.
Rotate the zoom ring to reduce or enlarge the image.
Focus ring
Zoom ring
3
If your image looks like
to one side of the screen at an angle. Place it directly in front of the
center of the screen, facing the screen squarely.
4
If your image looks like
Keystone button on the projector.
3
Choose a
Presentation Method
How do you want to get images to the projector?
Power
Page up
Power button
S-Video/Video Color Mode
A/V Mute
Freeze
E-Zoom
Enter
For details on any of these topics, see your User's Guide.
ESC
If connecting a computer...
1
Make sure you've turned on the projector and adjusted the image
as described at left.
2
Locate the VGA cable that came with the projector. Connect one end
to the projector's Computer/Component Video port.
Connect the other end to your laptop's video-out port. (If you're using
a desktop model, first disconnect the monitor cable from the computer,
then plug in the projector cable.)
continued
Keystone
button
or
, you've placed the projector off
or
, press the
or
side of the
To connect computer or video equipment,
see the instructions below and on the right.
To project over an 802.11b network, see
"If projecting wirelessly" on the back of this sheet.
To give a presentation stored on a memory card,
see Chapter 5 in your User's Guide.
continued
3
Press the Comp/EasyMP button on the remote control until your
computer image is displayed.
Power
Page down
Page up
Comp/EasyMP
S-Video/Video Color Mode
Comp/EasyMP button
4
If you're using a laptop and you see a blank screen, you may need to
adjust its display settings:
Windows
®
:
Hold down the Fn button on the keyboard and press the
function key that lets you display on an external monitor. It may have
an icon such as
, or it may be labeled CRT/LCD. You may have to
use the Display utility in the Control Panel to enable both the LCD
screen and the external monitor port.
Macintosh
OS 9 or earlier:
From the Apple menu, select Control
®
Panels, then click Monitors or Monitors and Sound. Click the
Arrange icon, then drag one monitor icon on top of the other;
this lets you display on both the projection screen and the LCD
screen. If this option isn't available, click the Monitor icon and
select a Simulscan resolution.
Click here
Macintosh OS X:
From the Apple menu, select System Preferences,
then click Displays. Select the VGA Display or Color LCD dialog box,
click the Arrange (or Arrangement) tab, and make sure Mirror
Displays is checked.
5
If you see an image but it's not displayed correctly, press the Auto
button on the remote control to automatically readjust it.
If connecting video equipment...
1
Make sure you've turned on the projector and adjusted the image
as described on the far-left.
2
Locate the RCA-style video cable that came with the projector.
Connect one end to the projector's Video port.
3
Connect the other end to the video-output connector on your
video equipment.
4
Press the S-Video / Video button on the remote control until your
video image is displayed.
Power
Page down
Page up
Comp/EasyMP
S-Video/Video Color Mode
S-Video/Video button
Drag one monitor
icon onto the other