Toshiba E-Studio 190F Manual rápido - Página 35

Navegue en línea o descargue pdf Manual rápido para Impresora todo en uno Toshiba E-Studio 190F. Toshiba E-Studio 190F 40 páginas. Internet facsimile/email and network scan functions
También para Toshiba E-Studio 190F: Manual rápido (2 páginas), Manual rápido (16 páginas)

Imprimir página

ATTENTION

Correct

Incorrect

NOTE: When the optional Tray-2 is installed and the same size of paper is loaded in both trays, the paper will be supplied

from Paper Tray-2 first. This is the default setting, if you wish to change the setting, please consult with your

service representative.

To make copies from the Sheet Bypass

Set the original(s) on the ADF.

Press

COPY

Set a sheet of paper into the Sheet Bypass.

PRESS "✽" appears in the upper line of the LCD display.

If you wish to make multiple copies from the Sheet Bypass (Thick media), input the desired number of copies first and

press

. After each media sheet is processed, a "BYPASS ADD PAPER" prompt message will appear on

START

LCD display, insert an additional media into the Sheet Bypass (one-at-a-time) until your copy job is completed.

Adding Paper / Tray-2

Always remove all paper from Tray-2, fan and straighten remaining paper before replenishing paper. This helps prevent

multiple sheets of paper from feeding through the Tray-2 at one time, thus reducing paper jams.

Maximum Copies Limitation

After setting the maximum allowed number of copies for each department, consult with your Key Operator when the total

copy count reaches the designated limit and the "MAX COPIES ALLOWED" message appears on the LCD.

(Side View)

When the optional Paper Tray-2 is installed, and either Paper

Tray (Tray-1 or Tray-2) is not closed firmly, paper jam may

occur.