Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Hoja de especificaciones - Página 4

Navegue en línea o descargue pdf Hoja de especificaciones para Software Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 6 páginas. Warranty statement
También para Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Primeros pasos (13 páginas), Folleto y especificaciones (6 páginas), Manual de instalación (16 páginas), Manual de consulta rápida (12 páginas), Manual de la red (46 páginas), Manual de instalación (4 páginas), Manual de información del producto (16 páginas), Garantía limitada (12 páginas)

Imprimir página
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Hoja de especificaciones
Windows
1
Make sure your computer and printer are turned on but the printer is NOT CONNECTED
to your computer.
If you see a Found New Hardware Wizard screen, click Cancel and disconnect the
Note:
USB cable.
2
Insert the Epson Stylus Pro 4880 printer CD.
With Windows Vista, if you see the AutoPlay window, click Run Epsetup.exe. When you see
Note:
the User Account Control screen, click Continue.
3
Click Install.
If you see message asking if you want to install
Note:
or run various installation programs, select Continue,
Continue Anyway, or Install this driver software
anyway.
4
When you see a window asking you
to connect the printer, connect the
USB cable.
With Windows XP, if you see a
Note:
Found New Hardware Wizard screen
after you connect the printer, select No,
not this time and click Next. Then click
Next again.
If installation doesn't continue
Note:
after a moment, make sure you securely
connected and turned on the printer.
5
Follow the on-screen instructions
to install all the necessary software
and manuals, and place a link to the
Epson Professional Imaging Website on your desktop.
6
When you're done, click Exit and remove the CD.
Load Roll Paper
1
Slide the black paper stop off the end of the spindle.
2
If the paper has a 2-inch core, remove the adapters by pressing the four tabs.
Make sure your hands are clean, and avoid touching the printable
Note:
surface of the paper. Try to handle paper by the edges. Make sure you don't rub
or scratch the coating or dent the edges of the paper.
3
Position the roll so the paper unwinds as shown, then slide
it onto the spindle.
4
Slide the black paper stop back onto the spindle. Insert it firmly into
the end of the roll.
5
Open the roll paper cover.
6
Place the paper and spindle in the printer as shown,
with the black end on the left.
Roll paper cover
Tab
Paper source button