Toshiba E-Studio 6506AC Manual de preparación del papel - Página 23

Navegue en línea o descargue pdf Manual de preparación del papel para Impresora todo en uno Toshiba E-Studio 6506AC. Toshiba E-Studio 6506AC 46 páginas.

Imprimir página

1.LOADING PAPER

If paper cannot be fed, printing takes a long time after feeding or the quality is poor, turn over the paper and

place it again as shown in the figure or place fewer sheets.

The operating procedure for using the bypass tray differs depending on the paper size to be used. See the table below

for the operating procedure of each size.

Paper size

Other than North

America: A3, A4, B4, B5

Standard size

North America: LD, LT,

LG, ST-R

Other than the above

Envelope

Others (Non-standard sizes)

 Bypass printing stops when the paper placed on the bypass tray runs out during printing, even if the paper of the

same size is in any of the drawers. Printing restarts when paper is supplied to the bypass tray.

 When you perform bypass copying, the [FUNCTION CLEAR] button on the control panel blinks to indicate that

copying has completed. Press this button to switch bypass copying to normal copying using the drawers.

(Even if you do not press the [FUNCTION CLEAR] button, the bypass copying mode will be cleared when the

automatic function clear mode kicks in after a specified period of time.)

 P.24 "Standard size paper on the bypass tray"

 P.25 "Envelopes on the bypass tray"

 P.27 "Non-standard paper on the bypass tray"

 P.28 "Long custom size paper on the bypass tray"

Procedure

Loading Paper on the Bypass Tray 23