Philips AZ102S Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Philips AZ102S. Philips AZ102S 15 páginas. Cd soundmachine
También para Philips AZ102S: Especificaciones (2 páginas), Manual del usuario (15 páginas), Manual del usuario (14 páginas), Manual del usuario (2 páginas), Manual del usuario (2 páginas), Manual del usuario (2 páginas), Manual del usuario (18 páginas), Manual del usuario (13 páginas), Especificaciones (2 páginas), Manual del usuario (13 páginas), Manual del usuario (1 páginas), Manual de servicio (11 páginas)

Philips AZ102S Manual del usuario

Troubleshooting

If a fault occurs, first check the points listed below before taking the set for repair.
If you are unable to remedy a problem by following these hints, consult your dealer or service centre.
WARNING:
Do not open the set as there is a risk of electric shock. Under no
circumstances should you try to repair the set yourself, as this will
invalidate the guarantee.
Problem
– Possible cause
Remedy
No sound /power
– Volume not adjusted
Adjust the VOLUME
– Power cord not securely connected
Connect the AC power cord properly
– Batteries dead/ incorrectly inserted
Insert (fresh) batteries correctly
– CD contains non-audio files
Press
,
once or more to skip to a CD audio
track, instead of the data file.
Display does not function properly / No
reaction to operation of any of the
controls
– Electrostatic discharge
Switch off and unplug the set. Reconnect after a
few seconds
--, Er or 01 indication
– No CD inserted
Insert a CD
– CD badly scratched or dirty
Replace/ clean CD, see Maintenance
– Laser lens steamed up
ait until lens has cleared
– CD-R/CD-RW is blank or not finalized
Use a finalized CD-R/CD-RW or suitable CD
Audio disc only
Note:
Make sure the CD is not encoded with
copyright protection technologies, as some
do not conform to the Compact Disc
standard.
The CD skips tracks
– CD damaged or dirty
Replace or clean CD
– Program/shuffle is active
Quit program/shuffle mode
Note: A CD badly scratch or dirty may result in
improper operation.

Specifications

Power consumption
Active....................................................................) 15W
Standby...............................................................) 0.7W
Dimensions ............290mm x 143mm x 240mm
Weight ..........................................................................1,62 kg