Philips BTM630 Manual del usuario - Página 19

Navegue en línea o descargue pdf Manual del usuario para Sistema estéreo Philips BTM630. Philips BTM630 34 páginas. Bluetooth wireless micro system
También para Philips BTM630: Especificaciones (2 páginas), Manual de inicio rápido (4 páginas), Manual de inicio rápido (4 páginas), Manual de inicio rápido (4 páginas), Manual del usuario (35 páginas), Especificaciones (2 páginas), Hoja de especificaciones (2 páginas), Especificaciones (2 páginas), Manual (34 páginas)

Imprimir página
Philips BTM630 Manual del usuario

Tuning to radio stations

1
Press SOURCE repeatedly (or TUNER on the
remote control) to select the tuner source (FM
or AM).
2
Hold
/
on the system (or
S
T
the remote control) and then release the button.
➜
The system will start searching for a radio
station with sufficient signal strength.
3
Repeat step 3 if necessary until you find the
desired station.
●
To tune to a weak station, press
5 /6
the system (or
briefly and repeatedly until you have found
optimal reception.
5 /6
on
/
on
S
T
on the remote control)

Radio Reception

Programming radio stations

You can store up to a total of 40 radio stations
(30 for FM and 10 for AM) in the memory.

Automatic programming

Automatic programming will start with a chosen
preset number. From this preset number
upwards, former programmed radio stations will
be overridden.
1
Press ALBUM • PRESET +/- on the system
(or ¡ / ™ on the remote control) to select the
preset number where programming should start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROG on the system (or PROG/
CLOCK on the remote control) for more than
two seconds to activate programming.
➜
All available stations are programmed.

Manual programming

1
Tune to your desired station (refer to "Tuning to
radio stations").
2
Press PROG on the system (or PROG/
CLOCK on the remote control) to activate
programming.
➜
PROG flashes in the display.
3
Press ALBUM • PRESET +/- on the system
(or 3 / 4 on the remote control) to allocate a
number from 1 to 40 to this station.
4
Press PROG on the system (or PROG/
CLOCK on the remote control) again to
confirm the setting.
➜
PROG disappears, the preset number and
the frequency of the preset station are shown.
5
Repeat the above four steps to store other
stations.
●
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

●
Press ALBUM • PRESET +/- on the system
(or 3 / 4 on the remote control) until the
desired preset station is displayed.
19