CRU Dataport DataPort 525 Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Recinto CRU Dataport DataPort 525. CRU Dataport DataPort 525 13 páginas. Usb 2.0 and firewire enclosure

Imprimir página

Setting up the Drive for Windows 98

WARNING: Formatting your drive will result in loss of data.

To install a drive on your computer via the USB port you must down-

load the drivers from CRU's website (www.cruinc.com). On the left

side of the page you will see a link titled Support. Click on Support,

then USB Drivers, and select the Windows 98SE USB drivers link.

Download the Win98 file and follow the instructions on the website to

install it.

Plug the USB/FireWire DataPort

turn on the power switch on the back of the enclosure.

The Device Driver Wizard will pop up. Click on next. The "recom-

mended" option will be selected: hit next. The wizard will be set to

install the software automatically. Hit next and the wizard will ask

where to look for the driver. Select the directory that you opened the

driver into or select the primary drive and let the computer find it.

Once the driver installation is completed hit close.

Right Click on My Computer and select Properties.

Select the Device Manager tab.

Click on the + beside Disk Drives.

Right click on your drive and select Properties.

Select the Settings tab, place a check beside Removable and

then assign it a drive letter.

After completing these steps, you will have to reboot your computer.

Once your computer has booted up you should see an additional icon

on your Task Bar. Double click My Computer. Your new drive

should now be listed. Double click on the drive. If it is a new drive or

a drive with an incompatible format, it will ask you to format it. Click

Yes. A new window will appear. At the top the capacity of your drive

will be listed, directly below that will be a section titled Format Type.

In this section you will select Full and select Start. Read and follow

the instructions to finish setting up your drive. REMEMBER, format-

ting your drive will result in loss of data.

WWW.CRUINC.COM • (800) 260-9800

350/525 into your computer and

™

Setting up the Drive for Windows 2000

WARNING: Formatting your drive will result in loss of data.

After connecting the DataPort

power switch on the back of the enclosure. A window will pop up for

the New Hardware Wizard (see Diagram 11). Follow the instructions

to add the new drive. After completing these instructions, do the

following:

Right click on My Computer

Click on Manage

In the Storage sub-section, click on Disk Management to

display a list of all the drives connected to your computer.

If you have not used the drive before you will have to partition it.

Left click on Action, select All Tasks and then left click on

Create Partition. REMEMBER, formatting will result in loss

of data.

This will bring up the Create Partition Wizard screen (see

Diagram 11). Follow the instructions and the drive will be

ready to use.

Diagram 11

WWW.CRUINC.COM • (800) 260-9800

350/525 to your computer, turn on the

™