Dimplex contempra ef KDS6401E Manual de piezas y mantenimiento - Página 16

Navegue en línea o descargue pdf Manual de piezas y mantenimiento para Estufa Dimplex contempra ef KDS6401E. Dimplex contempra ef KDS6401E 19 páginas. Dimplex - the glen dimplex group stove user's guide
También para Dimplex contempra ef KDS6401E: Manual práctico del usuario (10 páginas), Manual de piezas y mantenimiento (16 páginas)

Imprimir página

KDS6401E

If the stove was operating prior to servicing allow at least 10 minutes for light bulbs and

heating element to cool off to avoid accidental burning of skin.

Disconnect power before attempting any maintenance or cleaning to reduce the risk of

electric shock or damage to persons.

TO REPLACE THE HEATER ASSEMBLY

1. Remove the stove pipe kit (if equipped).

2. Remove the four screws from the rear panel and remove.

3. Locate and remove the four screws on the inner heater panel.

4. Locate the eight cam locks on the side and front panels inside the upper corners of

the stove and turn with a large slot screwdriver so the triangle on the cam lock is

pointing up towards the top of the stove.

5. Grasp the top at both sides and gently pull to release the top.

6. Remove the heater mounting screws.

7. Disconnect the wiring clips and connections noting their original locations and remove

the heater assembly.

8. Properly orientate the replacement heater assembly and connect all of the wiring clips

connections in their original locations.

9. Reassemble in the reverse order as above.