Dimplex contempra ef KDS6401E 부품 및 서비스 매뉴얼 - 페이지 16

{카테고리_이름} Dimplex contempra ef KDS6401E에 대한 부품 및 서비스 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dimplex contempra ef KDS6401E 19 페이지. Dimplex - the glen dimplex group stove user's guide
Dimplex contempra ef KDS6401E에 대해서도 마찬가지입니다: 실용적인 사용자 설명서 (10 페이지), 부품 및 서비스 매뉴얼 (16 페이지)

페이지 인쇄
Dimplex contempra ef KDS6401E 부품 및 서비스 매뉴얼
KDS6401E
If the stove was operating prior to servicing allow at least 10 minutes for light bulbs and
heating element to cool off to avoid accidental burning of skin.
Disconnect power before attempting any maintenance or cleaning to reduce the risk of
electric shock or damage to persons.

TO REPLACE THE HEATER ASSEMBLY

1. Remove the stove pipe kit (if equipped).
2. Remove the four screws from the rear panel and remove.
3. Locate and remove the four screws on the inner heater panel.
4. Locate the eight cam locks on the side and front panels inside the upper corners of
the stove and turn with a large slot screwdriver so the triangle on the cam lock is
pointing up towards the top of the stove.
5. Grasp the top at both sides and gently pull to release the top.
6. Remove the heater mounting screws.
7. Disconnect the wiring clips and connections noting their original locations and remove
the heater assembly.
8. Properly orientate the replacement heater assembly and connect all of the wiring clips
connections in their original locations.
9. Reassemble in the reverse order as above.
15