Pioneer DEH-2200UB Manual de instalación

Navegue en línea o descargue pdf Manual de instalación para Receptor para automóvil Pioneer DEH-2200UB. Pioneer DEH-2200UB 8 páginas. Cd rds receiver
También para Pioneer DEH-2200UB: Manual de instrucciones (20 páginas), Manual del usuario (28 páginas)

Imprimir página

Pioneer DEH-2200UB Manual de instalación

CD RDS RECEIVER

AUTORADIO CD RDS

SINTOLETTORE CD RDS

REPRODUCTOR DE CD CON RECEPTOR RDS

CD RDS-EMPFÄNGER

CD RDS-ONTVANGER

CD RDS ПРИЕМНИК

DEH-2220UB

DEH-2200UBB

DEH-2200UB

Installation Manual

Manuel d'installation

Manuale d'installazione

Manual de instalación

Installationsanleitung

Installatiehandleiding

Руководство по установке

Printed in China

Imprimé en Chine

<YRD5304-A/S> EW

Installation

Secure the mounting sleeve by using a

Important

screwdriver to bend the metal tabs (90°)

! Check all connections and systems before

into place.

final installation.

Dashboard

! Do not use unauthorized parts as this may

cause malfunctions.

! Consult your dealer if installation requires dril-

ling of holes or other modifications to the vehi-

cle.

! Do not install this unit where :

— it may interfere with operation of the vehi-

cle.

— it may cause injury to a passenger as a re-

sult of a sudden stop.

! The semiconductor laser will be damaged if it

Mounting sleeve

overheats. Install this unit away from hot

Install the unit as illustrated.

places such as near the heater outlet.

! Optimum performance is obtained when the

Nut

unit is installed at an angle of less than 60°.

Firewall or

metal support

60°

Metal strap

Screw

Screw (M4 8)

DIN front/rear mount

This unit can be properly installed either from

"Front" (conventional DIN front-mount) or

"Rear" (DIN rear-mount installation, utilizing

threaded screw holes on the sides of unit

# Make sure that the unit is installed securely in

chassis). For details, refer to the following in-

place. An unstable installation may cause skip-

stallation methods.

ping or other malfunctions.

! Use commercially available parts when in-

stalling.

DIN Rear-mount

Determine the appropriate position

DIN Front-mount

where the holes on the bracket and the

Insert the mounting sleeve into the

side of the unit match.

dashboard.

For installation in shallow spaces, use the sup-

plied mounting sleeve. If there is enough

space, use the mounting sleeve that came

with the vehicle.

Installation

Tighten two screws on each side.

Fastening the front panel

Screw (M5×8)

If you do not plan to detach the front panel,

the front panel can be fastened with the sup-

plied screw.

Mounting bracket

Dashboard or console

Screw

Removing the unit

Extend top and bottom of the trim ring

outwards to remove the trim ring. (When

reattaching the trim ring, point the side

with the groove down.)

Trim ring

! Releasing the front panel allows easier ac-

cess to the trim ring.

Insert the supplied extraction keys into

both sides of the unit until they click into

place.

Pull the unit out of the dashboard.

Installation