Pioneer DEH-2200UB Manuel d'installation
Parcourez en ligne ou téléchargez le pdf Manuel d'installation pour {nom_de_la_catégorie} Pioneer DEH-2200UB. Pioneer DEH-2200UB 8 pages. Cd rds receiver
Également pour Pioneer DEH-2200UB : Manuel d'utilisation (20 pages), Manuel du propriétaire (28 pages)
CD RDS RECEIVER
AUTORADIO CD RDS
SINTOLETTORE CD RDS
REPRODUCTOR DE CD CON RECEPTOR RDS
CD RDS-EMPFÄNGER
CD RDS-ONTVANGER
CD RDS ПРИЕМНИК
DEH-2220UB
DEH-2200UBB
DEH-2200UB
Installation Manual
Manuel d'installation
Manuale d'installazione
Manual de instalación
Installationsanleitung
Installatiehandleiding
Руководство по установке
Printed in China
Imprimé en Chine
<YRD5304-A/S> EW
<KOKZX> <09G00000>
Installation
2
Secure the mounting sleeve by using a
Important
screwdriver to bend the metal tabs (90°)
! Check all connections and systems before
into place.
final installation.
Dashboard
! Do not use unauthorized parts as this may
cause malfunctions.
! Consult your dealer if installation requires dril-
ling of holes or other modifications to the vehi-
cle.
! Do not install this unit where :
— it may interfere with operation of the vehi-
cle.
— it may cause injury to a passenger as a re-
sult of a sudden stop.
! The semiconductor laser will be damaged if it
Mounting sleeve
overheats. Install this unit away from hot
3
Install the unit as illustrated.
places such as near the heater outlet.
! Optimum performance is obtained when the
Nut
unit is installed at an angle of less than 60°.
Firewall or
metal support
60°
Metal strap
Screw
Screw (M4 8)
DIN front/rear mount
This unit can be properly installed either from
"Front" (conventional DIN front-mount) or
"Rear" (DIN rear-mount installation, utilizing
threaded screw holes on the sides of unit
# Make sure that the unit is installed securely in
chassis). For details, refer to the following in-
place. An unstable installation may cause skip-
stallation methods.
ping or other malfunctions.
! Use commercially available parts when in-
stalling.
DIN Rear-mount
1
Determine the appropriate position
DIN Front-mount
where the holes on the bracket and the
1
Insert the mounting sleeve into the
side of the unit match.
dashboard.
For installation in shallow spaces, use the sup-
plied mounting sleeve. If there is enough
space, use the mounting sleeve that came
with the vehicle.
En
Installation
2
Tighten two screws on each side.
Fastening the front panel
Screw (M5×8)
If you do not plan to detach the front panel,
the front panel can be fastened with the sup-
plied screw.
Mounting bracket
Dashboard or console
Screw
Removing the unit
1
Extend top and bottom of the trim ring
outwards to remove the trim ring. (When
reattaching the trim ring, point the side
with the groove down.)
Trim ring
! Releasing the front panel allows easier ac-
cess to the trim ring.
2
Insert the supplied extraction keys into
both sides of the unit until they click into
place.
3
Pull the unit out of the dashboard.
En
Installation
En