Pioneer S-DV535W Instrucciones de uso - Página 13
Navegue en línea o descargue pdf Instrucciones de uso para Receptor para automóvil Pioneer S-DV535W. Pioneer S-DV535W 47 páginas. Dvd/cd receiver; speaker system; digital; wireless speaker system
Listening to your system
Chapter 2
Listening to your system
Auto listening mode
The Auto listening mode is the simplest way to
listen to any source as it was mastered: the
output from the speakers mirrors the channels
in the source material.
CLEAR
SHIFT
•
Press SHIFT+SURROUND to select the
AUTO listening mode.
Listening in surround sound
You can listen to stereo or multichannel
sources in surround sound.
is generated from stereo sources using one of
the Dolby Pro Logic decoding modes.
CLEAR
SHIFT
•
Press SHIFT+SURROUND repeatedly to
select a listening mode.
The choices that appear in the display will vary
according to the type of source that's playing.
• AUTO – Auto listening mode (see above)
• DOLBY DIGITAL/DTS – Dolby Digital or
DTS decoding (depending on the source).
For a multichannel source, this will be the
same as AUTO.
• PROLOGIC – 4.1 channel surround sound
for use with any two-channel source
Note
1 If the source is Dolby Digital or DTS, the front panel 2 D or DTS indicator lights.
2 • Note that the input source must be switched to DVD/CD for multichannel playback.
• If you're planning on recording a multichannel source, refer to Recording mode on page 27.
3 When listening in DOLBY DIGITAL/DTS mode, two-channel material will automatically be played in surround sound using
Dolby Pro Logic II decoding.
SLEEP
DISPLAY
SURROUND
FRONT
SURROUND
1
2
Surround sound
SLEEP
DISPLAY
SURROUND
FRONT
SURROUND
1
• MOVIE – Pro Logic II 5.1 channel surround
sound, especially suited to movie sources
(use with any two-channel source)
• MUSIC – Pro Logic II 5.1 channel surround
sound, especially suited to music sources,
for use with any two-channel source
• STEREO – See Listening in stereo below
Listening in stereo
You can listen to any source—stereo or
multichannel—in stereo. When playing a
multichannel source, all channels are
downmixed to the front left/right speakers and
the subwoofer.
•
Press SHIFT+SURROUND repeatedly until
STEREO shows in the display.
Listening with headphones
When headphones are connected, only the
STEREO mode is available.
Using the SFC modes
The SFC (Sound Field Control) modes can be
used with any multichannel or stereo source
3
for a variety of additional surround sound
effects.
CLEAR
SLEEP
DISPLAY
SHIFT
SURROUND
FRONT
SURROUND
HOME
DVD
MENU
MENU
SYSTEM
TOP
SETUP
MENU
ENTER
SOUND
RETURN
MODE
TEST TONE
02
13
En