Pioneer S-DV535W Operating Instruction - Page 13

Browse online or download pdf Operating Instruction for Car Receiver Pioneer S-DV535W. Pioneer S-DV535W 47 pages. Dvd/cd receiver; speaker system; digital; wireless speaker system

Print Page

Listening to your system

Chapter 2

Listening to your system

Auto listening mode

The Auto listening mode is the simplest way to

listen to any source as it was mastered: the

output from the speakers mirrors the channels

in the source material.

CLEAR

SHIFT

•

Press SHIFT+SURROUND to select the

AUTO listening mode.

Listening in surround sound

You can listen to stereo or multichannel

sources in surround sound.

is generated from stereo sources using one of

the Dolby Pro Logic decoding modes.

CLEAR

SHIFT

•

Press SHIFT+SURROUND repeatedly to

select a listening mode.

The choices that appear in the display will vary

according to the type of source that's playing.

• AUTO – Auto listening mode (see above)

• DOLBY DIGITAL/DTS – Dolby Digital or

DTS decoding (depending on the source).

For a multichannel source, this will be the

same as AUTO.

• PROLOGIC – 4.1 channel surround sound

for use with any two-channel source

Note

1 If the source is Dolby Digital or DTS, the front panel 2 D or DTS indicator lights.

2 • Note that the input source must be switched to DVD/CD for multichannel playback.

• If you're planning on recording a multichannel source, refer to Recording mode on page 27.

3 When listening in DOLBY DIGITAL/DTS mode, two-channel material will automatically be played in surround sound using

Dolby Pro Logic II decoding.

SLEEP

DISPLAY

SURROUND

FRONT

SURROUND

Surround sound

SLEEP

DISPLAY

SURROUND

FRONT

SURROUND

• MOVIE – Pro Logic II 5.1 channel surround

sound, especially suited to movie sources

(use with any two-channel source)

• MUSIC – Pro Logic II 5.1 channel surround

sound, especially suited to music sources,

for use with any two-channel source

• STEREO – See Listening in stereo below

Listening in stereo

You can listen to any source—stereo or

multichannel—in stereo. When playing a

multichannel source, all channels are

downmixed to the front left/right speakers and

the subwoofer.

•

Press SHIFT+SURROUND repeatedly until

STEREO shows in the display.

Listening with headphones

When headphones are connected, only the

STEREO mode is available.

Using the SFC modes

The SFC (Sound Field Control) modes can be

used with any multichannel or stereo source

for a variety of additional surround sound

effects.

CLEAR

SLEEP

DISPLAY

SHIFT

SURROUND

FRONT

SURROUND

HOME

DVD

SYSTEM

TOP

SETUP

ENTER

SOUND

RETURN

MODE

TEST TONE