3Com 3C905C-TX-M Manual rápido - Página 9

Navegue en línea o descargue pdf Manual rápido para Tarjeta de red 3Com 3C905C-TX-M. 3Com 3C905C-TX-M 12 páginas. Etherlink pci network interface cards
También para 3Com 3C905C-TX-M: Manual rápido (12 páginas)

Imprimir página

4 Insert the Windows 95 CD or diskette, and then click OK.

If you do not have the Windows 95 CD or diskette, but the

Windows 95 installation ﬁles are on your hard drive, click

OK. Enter the directory in the Copy Files From entry box

(usually C:\WINDOWS\OPTIONS\CABS), and then click OK.

Files are copied. You are prompted for EtherDisk diskette 2.

5 Make sure that EtherDisk diskette 2 is in drive A, and

then click OK.

Files are copied. You are prompted to restart the PC.

6 Remove EtherDisk diskette 2 from drive A, and then

click Yes to restart the PC.

You must restart the PC to complete the installation.

The installation is complete. Go to "Verifying Successful

Installation" later in this guide to conﬁrm that the NIC is

properly installed.

After Windows restarts, double-click the Network icon

in the Windows Control Panel and make sure that the

conﬁguration settings are properly conﬁgured for your

network environment. Contact your system administrator

for assistance.

Windows 98

To install the NIC driver and software under Windows 98,

you need the Windows 98 installation ﬁles. These ﬁles

may be on a CD or diskettes, or they may have been copied

to your hard drive when Windows 98 was installed on

your PC.

If you encounter problems during the installation, see

the WIN98.TXT ﬁle located in the HELP directory on

EtherDisk diskette 3 for troubleshooting tips.

Before installing the NIC driver and software:

Make sure that you have run the preinstallation

program, as described earlier in this guide.

Make sure that the NIC is installed in the PC and

that it is connected to the network.

Installing the Driver and Software