3Com 3C905C-TX-M Manual rápido - Página 11

Navegue en línea o descargue pdf Manual rápido para Tarjeta de red 3Com 3C905C-TX-M. 3Com 3C905C-TX-M 12 páginas. Etherlink pci network interface cards
También para 3Com 3C905C-TX-M: Manual rápido (12 páginas)

Imprimir página

10 Remove EtherDisk diskette 2 from drive A, and then

click Yes to restart the PC.

You must restart the PC to complete the installation.

The installation is complete. Go to the next section,

"Verifying Successful Installation," to conﬁrm that the

NIC is properly installed.

After Windows restarts, double-click the Network icon

in the Windows Control Panel and make sure that the

conﬁguration settings are properly conﬁgured for your

network environment. Contact your system administrator

for assistance.

Verifying Successful Installation

To verify that the NIC and its software are properly installed

on a PC running Windows 95 or Windows 98:

1 Open the Windows Start menu, select Settings, and

then select Control Panel.

2 Double-click the System icon.

3 Select the Device Manager tab.

4 Double-click Network adapters and make sure that

the name of the NIC appears.

If a red X or a yellow exclamation point (!) appears next to

the name of the NIC, the installation was not successful.

See "Troubleshooting the Installation" and "Frequently

Asked Questions" in Chapter 5 of the user guide for

troubleshooting help.

Verifying Successful Installation