Pioneer A-09 Manual de servicio - Página 35
Navegue en línea o descargue pdf Manual de servicio para Amplificador Pioneer A-09. Pioneer A-09 37 páginas.
Imprimir páginaA-09
7. PANEL FACILITIES
IONEER
srucoaecen
AO
Class|A Power Stage
FRONT PANEL
|
@) POWER switch
Press to turn power to the unit ON and OFF.
@ VOLUME CONTROL
This control is used to adjust the sound volume.
NOTE:
Since this control is an attenuator-type volume control, a
clicking sound can be heard when adjusting the volume, in
accordance with the signal level. This clicking sound is normal
and not a malfunction.
@ VOLUME CONTROL indicator
This indicator flashes for about eight seconds whenever the
power is first turned on.
No sound
is produced while the
indicator is flashing.
@ INPUT SELECTOR
Use to select the playback source.
LINE:
For playback with a component connected to LINE
jacks.
TAPE 2:
For playback with a cassette deck connected to TAPE
2 jacks.
TAPE 1/DAT:
For playback with a cassette deck or digital audio
cassette deck connected to TAPE 1/DAT jacks.
cD:
For compact disc playback with a CD player.
PHONO:
For record playback with a turntable.
TUNER:
For AM or FM broadcast reception with a tuner.
BALANCE:
For playback with a component connected to the
BALANCE IN jacks.
58
@ REC SELECTOR (recording selector)
Use this contro! to switch between recording modes,
including TAPE 2 > 1, TAPE 1 > 2, OFF, and SOURCE.
TAPE 2 > 1: To record sounds from the TAPE 2 component
to the component connected to the TAPE 1/ DAT
jacks.
TAPE 1> 2:
To record sounds from the TAPE 1/DAT compo-
nent to the component connected to the TAPE
2 jacks.
OFF:
Set here when not recording any source.
SOURCE:
To record sounds from the source selected with
the INPUT SELECTOR.
In this case, the selected
source
sounds
are output to both the TAPE
V/DAT and TAPE 2 recording (REC) jacks.
NOTE:
Sound is not output to the TAPE 1/DAT and TAPE 2 recording
(REC) jacks in the following cases:
@
When the INPUT SELECTOR is set to TAPE 1/DAT, sound
is not output to the TAPE 1/DAT jacks.
@
When the INPUT SELECTOR is set to TAPE 2, sound is not
output to the TAPE 2 jacks.