Pioneer A-10-K Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer A-10-K. Pioneer A-10-K 12 páginas.
También para Pioneer A-10-K: Manual de instrucciones (13 páginas)

Imprimir página

Operation

To set for automatic standby status (Auto Power Down)

When this condition is set, if no input signal is detected for 30 minutes, the unit will automatically enter standby

status.

If the unit's power is ON, hold the unit's front-panel DIRECT button and LOUDNESS

button depressed simultaneously for three seconds.

When this condition is set to ON, the STANDBY/APD indicator on the unit's front panel will light green. Press the

buttons again to disable the setting.

• The factory default setting is OFF.

Note

• Depending on the device connected, excessive noise produced by the device may be interpreted as an audio

signal, thus preventing the Automatic Power-Down function from operating.

Restoring all the settings to the factory default settings

When power is in standby mode, hold the front-panel's DIRECT button and

SPEAKERS A button depressed simultaneously for five seconds.

Turn power ON to the unit.