Pioneer A-10-K 사용 설명서 - 페이지 10

{카테고리_이름} Pioneer A-10-K에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer A-10-K 12 페이지.
Pioneer A-10-K에 대해서도 마찬가지입니다: 사용 설명서 (13 페이지)

Operation

To set for automatic standby status (Auto Power Down)

When this condition is set, if no input signal is detected for 30 minutes, the unit will automatically enter standby

status.

If the unit's power is ON, hold the unit's front-panel DIRECT button and LOUDNESS

button depressed simultaneously for three seconds.

When this condition is set to ON, the STANDBY/APD indicator on the unit's front panel will light green. Press the

buttons again to disable the setting.

• The factory default setting is OFF.

Note

• Depending on the device connected, excessive noise produced by the device may be interpreted as an audio

signal, thus preventing the Automatic Power-Down function from operating.

When power is in standby mode, hold the front-panel's DIRECT button and

SPEAKERS A button depressed simultaneously for five seconds.

Turn power ON to the unit.