Pioneer A-403 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer A-403. Pioneer A-403 12 páginas.
CONNECTIONS
See page 6 for Connections.
Make ail the connections before plugging in AC cords.
CONNECTING THE SPEAKER CORDS
1. Strip off the vinyl covering and twist the tip of the
wire core.
Twist the wire core.
2. Loosen the knob and insert the wire core into the
terminal hole.
3. Tighten the knob to fix the wire core in place.
NOTE:
Do not allow the wire core to protrude and touch other terminals or
wires. /f the cores of different wires touch, damage may result to your
amplifier and/or speaker systems.
Speaker Impedance
When speaker systems are connected to only SPEAKERS A or
SPEAKERS
8B terminals,
such
speakers
should
have
rated
impedance in the range of 4 Q to 16 Q.
When speakers are connected to both the A and B terminals, they
should have a rated impedance in the range of 8 Q to 16 Q.
CONNECTING THE INPUT/OUTPUT CORDS
Connect the white piug to the L (left) channel, and the red plug to the
R (right) channel. Be sure to insert the plugs securely.
Left channel OL
White plug
Red plug
The INPUT/OUTPUT terminals of this unit are dull tinplated, for high
audio quality.
Turn off the power before connecting or disconnecting plugs.
AC OUTLETS (SWITCHED)
Power supplied through these outlets is turned on and off by the
amplifier's POWER switch. Total electrical power consumption of
connected equipment should not exceed 200 W.
AC OUTLET (UNSWITCHED)
Power flows continuously to this outlet, regardless of whether
the amplifier is switched on or off. Electrical power consumption
of the connected equipment should not exceed 100 W.
The equipment should be disconnected by removing the power
plug from the wall socket when notin regular use, e.g., when on
vacation.
NOTE:
Do not connect appliances with high power consumption such as
heaters, irons, or television sets to the AC OUTLETS in order to
avoid overheating or fire risk.
7
<ARE1316>
En