Pioneer A-403 사용 설명서 - 페이지 7

{카테고리_이름} Pioneer A-403에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Pioneer A-403 12 페이지.

페이지 인쇄

CONNECTIONS

See page 6 for Connections.

Make ail the connections before plugging in AC cords.

CONNECTING THE SPEAKER CORDS

1. Strip off the vinyl covering and twist the tip of the

wire core.

Twist the wire core.

2. Loosen the knob and insert the wire core into the

terminal hole.

3. Tighten the knob to fix the wire core in place.

NOTE:

Do not allow the wire core to protrude and touch other terminals or

wires. /f the cores of different wires touch, damage may result to your

amplifier and/or speaker systems.

Speaker Impedance

When speaker systems are connected to only SPEAKERS A or

SPEAKERS

8B terminals,

such

speakers

should

have

rated

impedance in the range of 4 Q to 16 Q.

When speakers are connected to both the A and B terminals, they

should have a rated impedance in the range of 8 Q to 16 Q.

CONNECTING THE INPUT/OUTPUT CORDS

Connect the white piug to the L (left) channel, and the red plug to the

R (right) channel. Be sure to insert the plugs securely.

Left channel OL

White plug

Red plug

The INPUT/OUTPUT terminals of this unit are dull tinplated, for high

audio quality.

Turn off the power before connecting or disconnecting plugs.

AC OUTLETS (SWITCHED)

Power supplied through these outlets is turned on and off by the

amplifier's POWER switch. Total electrical power consumption of

connected equipment should not exceed 200 W.

AC OUTLET (UNSWITCHED)

Power flows continuously to this outlet, regardless of whether

the amplifier is switched on or off. Electrical power consumption

of the connected equipment should not exceed 100 W.

The equipment should be disconnected by removing the power

plug from the wall socket when notin regular use, e.g., when on

vacation.

NOTE:

Do not connect appliances with high power consumption such as

heaters, irons, or television sets to the AC OUTLETS in order to

avoid overheating or fire risk.