Pioneer A-40AE Manual de instrucciones - Página 15
Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer A-40AE. Pioneer A-40AE 24 páginas.
![Pioneer A-40AE Manual de instrucciones](/uploads/products/server2/6624838/6624838.jpg)
Speaker impedance settings
1
2
3
8Ω
Depending on the speakers you connect and how you
connect them, you may need to change the speaker
impedance setting on this unit. Refer to the page describing
speaker connection (p8, 9, 10) and do the following
procedures if the change is required.
1. Press and hold DIRECT until some indicators, such as
3"
the input source indicators "CD/SACD" and "LINE 1", start
blinking on the unit.
0 The unit has switched to the setting mode when the
indicators blink and the current setting is displayed.
2. Take your finger off DIRECT for a moment.
3. Press and hold DIRECT again to change the setting. The
following content switches alternately by pressing and
holding the button.
- 4 ≠: "CD/SACD" and "LINE 1" indicators are blinking
- 8 ≠ (default value): "CD/SACD", "LINE 1", "LINE 2",
and "LINE 3" indicators are blinking
0 The setting mode ends after 5 seconds elapse with no
operations performed.
3"
4Ω
Preparations
15
En