Pioneer A-Z560 Manual de servicio - Página 37

Navegue en línea o descargue pdf Manual de servicio para Amplificador Pioneer A-Z560. Pioneer A-Z560 38 páginas.

Imprimir página

@) POWER STANDBY/ON

switch/indicator

This is the switch for electric power.

ON .... When set to the ON position, power is supplied and the unit

becomes operational.

STANDBY

.... When set to the STANDBY position, the main power

flow is cut and the unit is no longer fully operational.

A minute flow

of power feeds the unit to maintain operation readiness.

The indicator above the switch lights when the power is ON, and goes

out during STANDBY.

During STANDBY, the tuner display only shows the time on the clock.

@Remote sensor

@LSS SET switch

Use to operate the Listening Style Selector memory.

@LSS MODE switch

Use to recall the Listening Style Selector.

©) Display section

(DIRECT MODE switch

Use this when you want by-pass sound quality adjustment circuitry and

listen to a CD or DAT in the direct mode.

@MUTING switch/indicator

Use when you want to temporarily cut sound during playback. Press

again to return to the previous volume level.

VOLUME control

(@ PHONES jack

For stereo headphones.

NOTE:

There is no output from the speakers when headphones are plugged

into PHONES jack.

(10) Input selector switches/indicators

[PHONO]

Press to play records on a turntable connected to the PHONO input

jacks.

[TUNER]

Press to listen to radio broadcast.

[TAPE]

Press to listen to cassette tape.

[DAT]

Press to listen to a DAT playing on a digital audio tape deck connected

to the DAT jacks.

(CD)

Press to listen to compact disc.

[LD]

Press to play an LD on a video disc player connected to the LD input

jacks.

[VCR]

Press to play a tape on a video cassette recorder connected to the VCR

jacks.

(1) MIC (microphone) jack

This is a standard jack for connecting a microphone.

NOTE:

Mike mixing is not possible when CD DIRECT

or DAT DIRECT are ON.

@2 MIC LEVEL control

Used for adjusting the volume of microphone.

@ BALANCE control

Used for changing the balance between left and right channels. Usually

set this control to the center position.

VIDEO SIGNAL SELECTOR switch/indicator

Pressing this switch lets you select video sources independent of those

selected with the input selector switches. Each time you press it, the

source changes.

@® This lights during listening style selector operation.

switch and listening style selector position is displayed.