ページを印刷する@) POWER STANDBY/ON
switch/indicator
This is the switch for electric power.
ON .... When set to the ON position, power is supplied and the unit
becomes operational.
STANDBY
.... When set to the STANDBY position, the main power
flow is cut and the unit is no longer fully operational.
A minute flow
of power feeds the unit to maintain operation readiness.
The indicator above the switch lights when the power is ON, and goes
out during STANDBY.
During STANDBY, the tuner display only shows the time on the clock.
@Remote sensor
@LSS SET switch
Use to operate the Listening Style Selector memory.
@LSS MODE switch
Use to recall the Listening Style Selector.
©) Display section
(DIRECT MODE switch
Use this when you want by-pass sound quality adjustment circuitry and
listen to a CD or DAT in the direct mode.
@MUTING switch/indicator
Use when you want to temporarily cut sound during playback. Press
again to return to the previous volume level.
VOLUME control
(@ PHONES jack
For stereo headphones.
NOTE:
There is no output from the speakers when headphones are plugged
into PHONES jack.
(10) Input selector switches/indicators
[PHONO]
Press to play records on a turntable connected to the PHONO input
jacks.
[TUNER]
Press to listen to radio broadcast.
[TAPE]
Press to listen to cassette tape.
[DAT]
Press to listen to a DAT playing on a digital audio tape deck connected
to the DAT jacks.
(CD)
Press to listen to compact disc.
[LD]
Press to play an LD on a video disc player connected to the LD input
jacks.
[VCR]
Press to play a tape on a video cassette recorder connected to the VCR
jacks.
(1) MIC (microphone) jack
This is a standard jack for connecting a microphone.
NOTE:
Mike mixing is not possible when CD DIRECT
or DAT DIRECT are ON.
@2 MIC LEVEL control
Used for adjusting the volume of microphone.
@ BALANCE control
Used for changing the balance between left and right channels. Usually
set this control to the center position.
VIDEO SIGNAL SELECTOR switch/indicator
Pressing this switch lets you select video sources independent of those
selected with the input selector switches. Each time you press it, the
source changes.
@® This lights during listening style selector operation.
© Information such as the component selected with the input selector
switch and listening style selector position is displayed.
© This lights when you can select CD and DAT direct mode.
©) This lights when you play a CD.
59