Pioneer GM-D7500M SERIES Manual del usuario - Página 9
Navegue en línea o descargue pdf Manual del usuario para Amplificador Pioneer GM-D7500M SERIES. Pioneer GM-D7500M SERIES 15 páginas. Class d mono amplifier
También para Pioneer GM-D7500M SERIES: Manual del usuario (36 páginas), Manual de servicio (31 páginas)
Imprimir página
Connecting the units
Connecting the power
terminal
! The use of a special red battery and ground
wire RD-223, available separately, is recom-
mended. Connect the battery wire directly
to the car battery positive terminal (+) and
the ground wire to the car body.
WARNING
If the battery wire is not securely fixed to the term-
inal using the terminal screws, there is a risk of
overheating, malfunction and injury, including
minor burns.
1
Route battery wire from engine com-
partment to the vehicle interior.
After completing all other amplifier connec-
tions, finally connect the battery wire terminal
of the amplifier to the positive (+) battery
terminal.
1 Positive (+) terminal
2 Engine compartment
3 Vehicle interior
4 Fuse (30 A) × 2
5 Insert the O-ring rubber grommet into the
vehicle body.
6 Drill a 14 mm hole into the vehicle body (1/2
in.) .
2
Twist the battery wire, ground wire
and system remote control wire.
3
Attach lugs to wire ends. Lugs not sup-
plied.
Use pliers, etc., to crimp lugs to wires.
1 Lug
2 Battery wire
3 Ground wire
4
Connect the wires to the terminal.
Fix the wires securely with the terminal
screws.
1 System remote control terminal
2 GND terminal
3 Power terminal
Section
03
Twist
9
En