Pioneer GM-D7500M SERIES Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penguat Pioneer GM-D7500M SERIES. Pioneer GM-D7500M SERIES 15 halaman. Class d mono amplifier
Juga untuk Pioneer GM-D7500M SERIES: Panduan Pemilik (36 halaman), Panduan Servis (31 halaman)

Halaman Cetak

Pioneer GM-D7500M SERIES Panduan Pemilik

Connecting the units

Connecting the power

terminal

! The use of a special red battery and ground

wire RD-223, available separately, is recom-

mended. Connect the battery wire directly

to the car battery positive terminal (+) and

the ground wire to the car body.

WARNING

If the battery wire is not securely fixed to the term-

inal using the terminal screws, there is a risk of

overheating, malfunction and injury, including

minor burns.

Route battery wire from engine com-

partment to the vehicle interior.

After completing all other amplifier connec-

tions, finally connect the battery wire terminal

of the amplifier to the positive (+) battery

terminal.

1 Positive (+) terminal

2 Engine compartment

3 Vehicle interior

4 Fuse (30 A) × 2

5 Insert the O-ring rubber grommet into the

vehicle body.

6 Drill a 14 mm hole into the vehicle body (1/2

in.) .

Twist the battery wire, ground wire

and system remote control wire.

Attach lugs to wire ends. Lugs not sup-

plied.

Use pliers, etc., to crimp lugs to wires.

1 Lug

2 Battery wire

3 Ground wire

Connect the wires to the terminal.

Fix the wires securely with the terminal

screws.

1 System remote control terminal

2 GND terminal

3 Power terminal

Section

Twist