Pioneer SX-980 Manual de instrucciones - Página 7

Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer SX-980. Pioneer SX-980 22 páginas. Am/fm stereo receiver
También para Pioneer SX-980: Manual de instrucciones (28 páginas)

Imprimir página

Connect your second turntable to the PHONO 2 input

Jacks.

If your

turntable

is fitted

with

two

tonearms,

the

output

cords

for each

of the

tonearms

should

connected to the PHONO

I and PHONO 2 input jacks.

Fig. 3

TAPE DECK CONNECTIONS

The receiver is provided with two sets of recording

(TAPE

REC)

output jacks and two sets of play-

back (TAPE PLAY) input jacks. Connect each of

the jacks in the following way using the connecting

cords which come

with the tape deck. The upper

row

of jacks is for the left channel

(L) and the

lower row for the right channel (R) (Fig. 4).

Connections for recording

Connect the recording input jacks (LINE INPUT)

on the tape deck to the TAPE 1 REC jacks on the

receiver.

Connections for playback

Connect

the playback

output jacks (LINE OUT-

PUT) on the tape deck to the TAPE 1 PLAY jacks

on the receiver.

NOTE:

Connect

your

second

tape deck

to the TAPE

2 jacks

(REC, PLAY).

PIONEER

SX-980

Tape deck 1

Recording connections

Connections using the recording/playback

connector (DIN cord)

If your tape deck is equipped with a recording/

playback

connector

(DIN-type), use the optional

recording/playback cord to connect this connector

with the TAPE 2 REC/PLAY jack on the receiver.

This means that the deck and receiver are now set

up for both recording and playback (Fig. 5).

In such cases, do not connect pin cords (ordinary

pin plug cords) to the TAPE

2 REC and PLAY

jacks.

REC/PLAY

jack

REC/PLAY

cord

TAPE 2:

REC

PLAY

Tape deck 2

Fig, 5