Pioneer SX-980 Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Pioneer SX-980. Pioneer SX-980 22 страницы. Am/fm stereo receiver
Также для Pioneer SX-980: Руководство по эксплуатации (28 страниц)
Печатать страницу
e
Connect your second turntable to the PHONO 2 input
Jacks.
e
If your
turntable
is fitted
with
two
tonearms,
the
output
cords
for each
of the
tonearms
should
be
connected to the PHONO
I and PHONO 2 input jacks.
Fig. 3
TAPE DECK CONNECTIONS
The receiver is provided with two sets of recording
(TAPE
REC)
output jacks and two sets of play-
back (TAPE PLAY) input jacks. Connect each of
the jacks in the following way using the connecting
cords which come
with the tape deck. The upper
row
of jacks is for the left channel
(L) and the
lower row for the right channel (R) (Fig. 4).
Connections for recording
Connect the recording input jacks (LINE INPUT)
on the tape deck to the TAPE 1 REC jacks on the
receiver.
Connections for playback
Connect
the playback
output jacks (LINE OUT-
PUT) on the tape deck to the TAPE 1 PLAY jacks
on the receiver.
NOTE:
Connect
your
second
tape deck
to the TAPE
2 jacks
(REC, PLAY).
PIONEER
SX-980
Tape deck 1
Recording connections
Connections using the recording/playback
connector (DIN cord)
If your tape deck is equipped with a recording/
playback
connector
(DIN-type), use the optional
recording/playback cord to connect this connector
with the TAPE 2 REC/PLAY jack on the receiver.
This means that the deck and receiver are now set
up for both recording and playback (Fig. 5).
In such cases, do not connect pin cords (ordinary
pin plug cords) to the TAPE
2 REC and PLAY
jacks.
REC/PLAY
jack
REC/PLAY
cord
TAPE 2:
REC
PLAY
|
®
Tape deck 2
ar
Fig, 5