Pioneer PD-S701 Manual de instrucciones - Página 15

Navegue en línea o descargue pdf Manual de instrucciones para Reproductor de CD Pioneer PD-S701. Pioneer PD-S701 22 páginas. Compact disc player
También para Pioneer PD-S701: Manual de instrucciones (32 páginas)

Imprimir página

TO PLAY ONLY DESIRED TRACKS

Programming a pause

]

| To check the program contents

inserting a pause in your program can be very useful when carrying

out recording. Press #f instead of entering a track number.

"PA"

appears on the display.

For example, when recording on both sides of a cassette tape,

if you program a pause after the last track to be recorded on

the first side, program playback will pause at that point to aliow

you to switch tape sides, To resume program playback after the

player enters pause mode, press IE.

NOTES:

A pause can be programmed only when the program procedure

is performed under stop mode.

A pause cannot be programmed at the beginning of a program,

nor can two pauses be programmed one after the other.

A pause inserted in a program is counted as one step.

If a pause is programmed as the last step of a program, the

player will not enter the pause mode.

To clear all of the program contents

OPEN/CLOSE

"BSE

During stop mode, press mi.

When the disc tray is ejected, the program contents will be

cleared,

To erase a program

PD-S801

CLEAR

PD-S701

CLEAR

»* []

J?)

OF Sg

During program mode, press CLEAR.

he last program step is erased and the contents of the previous

fagram step are displayed.

NOTE:

Contents of a program can be erased during playback as well.

However,

tracks preceding the currently playing track cannot be

erased in this way.

PD-S801

PD-S701

CHECK

Ft;

anal

1. With the player in the program stop mode, press CHECK.

Each time the button is pressed, the programmed tracks willbe

displayed in the order they were programmed.

2. After confirming the last program step, the track number display

will show "00".

3. When CHECK is pressed again, the display will return to that

shown in step 1

To modify the program contents

pp-ss01

PD-S701

CHECK

1. Press CHECK so that the program step to be corrected appears on

the display.

2. Enter the new track No. with the digit buttons. For example, the

programmed track No. 3 in step 2 is changed to track No. 7, using

the [7] button.

Repeat steps 1 and 2 to change other tracks as desired.

15.