Pioneer DV-2022 Instrucciones de uso - Página 2

Navegue en línea o descargue pdf Instrucciones de uso para Reproductor de DVD Pioneer DV-2022. Pioneer DV-2022 2 páginas. dvd player
También para Pioneer DV-2022: Instrucciones de uso (2 páginas)

Imprimir página

Convenient functions

Playing in the desired

Playing files on USB

order (Programmed Play)

devices

• The player may not recognize the USB device, play files

or supply power to the USB device. For details, see When

a USB device is connected in section 7.

Display the Play Mode screen.

• Pioneer does not support that all files recorded on all

Select Play Mode from HOME MENU screen.

USB devices will play or that power will be supplied to

Select Program.

the USB device. Also note that Pioneer will accept no

responsibility whatsoever for loss of files on USB devices

Use

to select, then press ENTER or

caused by connection to this player.

Select Create/Edit.

Switch to USB mode.

Use

to select, then press ENTER.

Press DVD/USB.

• The Create/Edit screen differs according to the disc

USb is displayed on the front panel display.

or file.

Connect the USB device.

Select the title, chapter, track or file.

Connect the USB device to the USB port on the front

Use

to select, then press ENTER.

panel (section 2).

• To add to a program, first select the place in the

The Disc Navigator appears automatically.

program (the program step), next select the title,

chapter, track or file then press ENTER (files are

Start playback.

added at the end of program).

Use

to select the file, then press ENTER.

• Press RETURN to return to the previous screen. If you

• Turn the power off before removing the USB device.

return to the previous screen when inputting it, the

• To return to DVD mode, press DVD/USB or  OPEN/

settings you have programmed are cleared.

CLOSE.

• To delete a step, highlight it and press CLEAR.

Copying files on to USB

Start playback.

Press  PLAY.

devices

• To play the program, select Playback Start from the

program screen, then press ENTER.

• To resume normal playback, select Playback Stop

from the program screen, then press ENTER. The

Files stored on the discs can be copied on to the USB

program remains in the memory.

device through the player.

• To cancel the entire program, select Program Delete

from the program screen, then press ENTER.

Display the Disc Navigator screen.

Notes

Press MENU.

• Press  STOP to stop playback if the file is being

• Programs can be played repeatedly. Select Program

played.

Repeat from Repeat on the Play Mode screen during

programmed playback.

Select the file.

• Programs cannot be played in random order (random

Use

to select, then press

play is not possible during programmed play).

Start copying.

Use

to select Yes, then press ENTER.

The file copying process will appear on the screen.

Notes

• Do not operate any buttons during the file copying

process.

• A folder named "PIONEER" is automatically created on

the USB device.

The copied files are stored in this folder.

Troubleshooting

• Incorrect operation is often mistaken for trouble or

Folder or file names are not displayed or properly

malfunction. If there is something wrong with this player,

displayed

check the symptoms below.

Only 1-byte alphanumeric characters can be displayed.

Sometimes the trouble lie in another component

Folder and file names including characters other than

connected to this player. Inspect the component and

1-byte alphanumeric characters may be displayed for

electrical appliances being used. If the trouble cannot be

example as F_007 or FL_001, and the characters may

rectified after checking the items below, ask your nearest

be garbled.

Pioneer authorized service center or your dealer to carry

out repair work.

Much time is required to play JPEG files.

• The player may not operate properly due to static

The player may take longer to display large files.

electricity or other external influences. In such cases,

normal operation may be restored by unplugging the

Black bars are displayed when playing JPEG files.

power cord then plugging it back in.

Black bars may be displayed along the top and bottom

Difference in volume between DVD and CD.

or sides when JPEG files with different aspect ratios

are played.

The volume may sound different due to differences in

how the signals are recorded on the disc.

When a USB device is connected

Disc cannot be played or disc tray opens automatically.

USB device is not recognized.

If the disc is dirty, wipe the dirt off the disc (section 8).

Turn the power off, then disconnect and reconnect the

Set the disc with the printed side facing up.

USB device.

Check the disc's region number, and if the number is

This player does not support USB hubs. Connect the

compatible for playback on the player (section 3).

USB device directly.

Only the discs with the appropriate region number or

"ALL" can be played.

This player only supports USB mass storage class

devices.

The power turns off automatically.

This player supports portable flash memory and digital

If Auto Power Off is set to On, the power turns off

audio playback devices.

automatically if no operation has done for over 30

Only the FAT16 and FAT32 file systems are supported.

minutes (section 6).

Other file systems (exFAT, NTFS, etc.) are not

supported.

Picture is stretched, or aspect ratio cannot be changed.

If the USB device is equipped with an AC adapter, use

Refer to the TV's operating instructions and set the TV's

the USB device with the AC adapter connected.

aspect ratio properly.

Some USB devices may not be recognized properly.

Set TV Screen properly (section 6).

File cannot be played.

Picture is disturbed or dark during playback.

When the player and the TV are connected via a video

Files stored on a computer cannot be played.

deck, "analog copy protect function" may cause the

picture being played on the video deck not to display

It may not be able to play some files.

properly. Connect the player and TV directly.

Folder or file names are not displayed or properly

Set the TV system properly. The factory default setting

displayed.

is AUTO. If the picture is distorted, switch the TV

The maximum displayable number of characters for the

system to the one used in your country or region (NTSC

folder and file names on the Disc Navigator is 14.

or PAL) (section 8).

96 kHz/88.2 kHz digital audio signals are not output

Folder or file names are not displayed in alphabetical

from the COAXIAL DIGITAL AUDIO OUT terminals.

order.

Set 96 kHz PCM Out to 96kHz > 48kHz.

The order of the folder and file names displayed on the

Disc Navigator is dependant on the time and date when

The 96 kHz/88.2 kHz digital audio signals of copyright-

the folders or files were created on the USB device.

protected discs cannot be output.

Much time is required to recognized the USB device.

Folder or file names are not recognized.

It may take longer to load data when a large capacity

This player can recognize up to 299 folders on one

USB device is connected (this could take several

disc and 648 files within one folder. Depending on the

minutes).

folder structure, however, the player may not be able to

recognize certain folders or files.

Karaoke

Recording audio CD tracks

Using karaoke

on to USB devices

(Except

To use the karaoke function, connect the player to the TV or

AV amplifier, etc., using analog cables.

Australian models)

Be sure to adjust the volume to the minimum before

connecting the microphone, otherwise it may result in

damage to the speakers.

Adjust the microphone volume to

• The tracks can be recorded from the audio CD on to the

USB device through the player.

minimum.

• If recording fails, refer to When a USB device is connected

Turn VOLUME on the front panel counterclockwise

in section 7.

(to MIN).

Load the audio CD.

Connect the microphone.

• Press  STOP to stop playback if it starts

Connect the microphone to the MIC terminal on the

automatically.

front panel. (section 2)

Display the HOME MENU screen.

Load the disc and start playback.

Press HOME MENU.

• Adjust the volume of the connected TV, etc. VOLUME

on the front panel only adjusts the volume of the

Select CD -> USB Rec.

microphone.

Use

to select, then press ENTER.

Adjust the microphone volume.

Select Select Track.

Turn VOLUME on the front panel clockwise (towards

Use

to select, then press ENTER or

MAX).

Select the type of recording.

Use

to select, then press ENTER or

To adjust the key or echo...

Types of recording

1 Display the Karaoke Settings screen.

• Individual: Select 1 track at a time.

Press KARAOKE.

• Select All: Select all the tracks.

2 Select Key/Echo.

• All Clear: Deselect all the tracks.

Use

3 Adjust the echo or key.

Select Bitrate (transfer rate).

Use

to select, then press ENTER.

(ECHO - or ECHO +) to adjust within 5 seconds.

• Select 128kbps, 192kbps or 320kbps.

• The key can be adjusted up or down by five units

each.

Start recording.

Notes

Use

to select Start, then press ENTER.

• The sound may be distorted if the microphone volume is

Notes

too high.

• The audio signals are converted into MP3 format for

• If there is howling, move the microphone away from the

output.

speakers. Also try lowering the volume and echo level.

• CD -> USB Rec can only be selected when the audio CD

is stopped.

• When recording is completed, a folder named

"PIONEER" is automatically created on the USB device.

The recorded tracks are stored in this folder.

Additional information

When connected to an HDMI-

Setting the TV system

compatible device

• If the picture of the disc being played is distorted, switch

(DV-3022KV/DV-3022V)

the TV system to the one used in your country or region.

• When the TV system is switched, the types of discs that

Picture is not displayed.

can be played are limited.

• The factory default setting is AUTO.

Restore HDMI Resolution to the default setting

(720x480p/720x576p) (section 6).

While the player is in the standby mode...

With some cables, 1 080p video signals cannot be

Press  STANDBY/ON while pressing .

output.

Use the buttons on the front panel.

The power turns on and the TV system switches as

Multichannel audio signals are not output.

shown below.

Set HDMI Out to Auto (section 6).

• AUTONTSC

• NTSCPAL

Control function does not work.

• PALAUTO

Use a High Speed HDMI

cable.

Set Control to On on the player (section 6).

Types of

Format

The control function does not work with devices of

discs/files

other brands. Even when connected to a Pioneer

NTSC

product compatible with the Control function, some of

the functions may not work.

PAL

The message CEC200 appears.

When the Disc Navigator is selected using the Flat

Screen TV's remote controller and the player is turned

off, the message CEC200 will be displayed. This is not

—

a malfunction.

Turn on the player to use the function.

no disc

The player turns on or off automatically.

The player may turn on together with the TV connected

Cautions on use

to HDMI OUT terminal. If you do not want them to turn

on at the same time, set Control to Off (section 6).

When moving the player

The input of the connected TV or AV system is switched

When moving the player, check first that there is no

to the player's automatically.

disc loaded and that the disc tray is closed. Then press

The input of the TV and AV system (AV receiver or

 STANDBY/ON on the player (or  STANDBY/ON on the

amplifier, etc.) connected to the HDMI OUT terminal

remote control), wait for the OFF indicator on the front

may be automatically switched to the player when

panel display to turn off, then unplug the power cord.

playback starts on the player or the menu screen

Moving the player with a disc inside it could result in

(HOME MENU, etc.) is displayed. If you do not want the

damage.

connected TV and AV system (AV receiver or amplifier,

etc.) affected by the player's operation, set Control to

Place of installation

Off (section 6).

• Choose a stable place near the TV or stereo system

being used with the player.

• Do not place the player on top of a TV or color monitor.

Also install it away from cassette decks and other

devices easily affected by magnetic forces.

Avoid the following types of places:

• Places exposed to direct sunlight

• Humid or poorly ventilated places

• Extremely hot places

• Places exposed to vibrations

• Places in which there is much dust or cigarette smoke

• Places exposed to soot, steam or heat (kitchens, etc.)

(DV-3022KV/DV-2022K)

Extra functions for

karaoke

Scoring your karaoke

Display the Karaoke Settings screen.

Press KARAOKE.

Select Karaoke Score.

Use

to select, then press ENTER or

Activate karaoke scoring.

Use

to select On, then press ENTER.

Notes

• To cancel scoring, select Off on the Karaoke Score

screen.

• Karaoke scoring can be activated before or during

playback.

Recording your karaoke tracks on to

USB devices

You can record your karaoke tracks on to the USB device

through the player.

Notes

to select, then press ENTER or

Use this function after adjusting the microphone volume

and the echo level using the operations on the left column.

(KEY  (high)/ KEY  (low) or

Display the Karaoke Settings screen

during the playback.

Press KARAOKE while the Video CD is played.

Select Karaoke Rec.

Use

to select, then press ENTER or

Start Karaoke recording.

Use

to select Yes, then press ENTER.

• AS soon as you select Yes, the track has been

playing starts playback from the beginning and

recording starts.

• When recording is completed, a folder named

"KARAOKE" is automatically created on the USB

device. The recorded tracks are stored in this folder.

Do not place objects on the player.

Do not place any objects on top of the player.

Do not obstruct the ventilation holes.

Do not use the player on shaggy rugs, beds, sofas, etc., or

wrapped in cloth, etc. Doing so will prevent the heat from

dispersing, leading to damage.

Do not expose to heat.

Do not place the player on top of an amplifier or other

component that generates heat. When placing it in a rack,

to avoid the heat given off by the amplifier or other audio

component, place it on a shelf below the amplifier.

Turn off the player's power when

not using it.

Depending on signal conditions, striped patterns may

Player setting

appear on a TV screen and noise may enter the sound of

NTSC

PAL

AUTO

radio broadcasts when the player's power is on. If this

NTSC

PAL

NTSC

happens, turn the player's power off.

About condensation

NTSC

PAL

If the player is moved suddenly from a cold place into a

warm room (in winter, for example) or if the temperature

in the room in which the player is installed rises suddenly

NTSC or

due to a heater, etc., water droplets (condensation) may

NTSC

PAL

form inside (on operating parts and the lens). When

condensation is present, the player will not operate

properly and playback is not possible. Let the player stand

at room temperature for 1 or 2 hours with the power turned

on (the time depends on the extent of condensation). The

water droplets will dissipate and playback will become

possible. Condensation can also occur in the summer if the

player is exposed to the direct wind from an air-conditioner.

If this happens, move the player to a different place.

Cleaning the product

• Unplug the power cord from the power outlet when

cleaning the player.

• Clean the player using a soft cloth. For tough dirt, apply

some neutral detergent diluted in 5 to 6 parts water to a

soft cloth, wring out thoroughly, wipe off the dirt, then

wipe again with a soft, dry cloth.

• Alcohol, thinner, benzene, insecticides, etc., could cause

the print or paint to peel off. Also, leaving rubber or vinyl

products in contact with the player for long periods of

time could mar the cabinet.

• When using chemical-impregnated wipes, etc., read the

cautions included with the wipes carefully.

Caution for when the unit is

installed in a rack with a glass door

Do not press  OPEN/CLOSE on the remote control to open

the disc tray while the glass door is closed. The door will

hamper the movement of the disc tray, and the unit could

be damaged.

Changing the settings

The factory default settings are indicated in italic.

Digital Out

• Select whether to output digital audio signals (On) from the

Audio Settings parameters

COAXIAL DIGITAL AUDIO OUT terminals or not (Off).

Dolby Digital Out

Sound Retriever (High/Low/Off)

• Select whether to output Dolby Digital audio signals

• The sound of a WMA or MP3 file is played with high

(Dolby Digital) or to convert them into linear PCM

sound quality. This is only valid for files with the

signals (Dolby Digital > PCM), according to the

extension ".wma" or ".mp3".

connected unit.

• The effect depends on the file. Try different settings, and

choose the one providing the good effect.

DTS Out

• Select whether to output DTS audio signals (DTS) or not

Equalizer (Off/Rock/Pop/Live/Dance/Techno/Classic/

(Off), according to the connected unit.

Soft)

• Select according to the genre of music to be listened to.

96 kHz PCM Out

• Select whether to output 96 kHz audio signals (96kHz) or

Audio DRC (High/Medium/Low/Off)

to convert them into linear PCM signals (96kHz >

• This makes loud sounds weaker and weak sounds

48kHz), according to the connected unit.

louder.

• This setting only affects Dolby Digital sound.

MPEG Out

• The effect depends on the volume of the connected units.

• Select whether to output MPEG audio signals (MPEG) or

Try different settings, and choose the one providing the

to convert them into linear PCM signals (MPEG > PCM),

strongest effect.

according to the connected unit.

Dialog (High/Medium/Low/Off)

Video Output settings

• Change this setting if the sound of the dialogs is too low.

TV Screen

About Sound Retriever function

• Change the picture's display format (4:3 (Letter Box)/4:3

When audio data is removed during the compression

(Pan & Scan)/16:9 (Wide)/16:9 (Compressed)), according

process, sound quality often degrades. The Sound Retriever

to the connected TV.

function automatically enhances compressed audio and

The player's factory default settings are set as below.

restores CD quality sound.

DV-3022KV/DV-3022V . . . . . . . . . . . . . . . . . . . . 16.9 (Wide)

DV-2022K/DV-2022 . . . . . . . . . . . . . . . . . . . 4.3 (Letter Box)

Video Adjust parameters

• 16:9(Compressed) can only be set on DV-3022KV and

DV-3022V.

Sharpness (Fine/Standard/Soft)

• Adjusts the picture's sharpness.

Component Out

• Change the output format of the video signals output

Brightness (-20 to +20)

from the COMPONENT VIDEO OUT terminals

• Adjusts the picture's brightness.

(Progressive/Interlace).

Contrast (-16 to +16)

HDMI Resolution (DV-3022KV/DV-3022V)

• Adjusts the ratio of the brightness of the brightest and

• Change the resolution of the video signals output from

darkest portions of the picture.

the HDMI OUT terminals (720x480i/720x576i/720x480p/

Gamma (-3 to +3)

720x576p/1280x720p/1920x1080i/1920x1080p).

• Adjusts the look of the dark portions of the picture.

HDMI Color (DV-3022KV/DV-3022V)

Hue (green 9 to red 9)

• Change the video signals output from the HDMI OUT

• Adjusts the balance between green and red.

terminal (Full range RGB/RGB/Component).

Chroma Level (-9 to +9)

Deep Color (DV-3022KV/DV-3022V)

• Adjusts the density of the colors. This setting is effective

• Select Auto when the connected TV or monitor is

for sources with many colors, such as cartoons.

compatible with Deep Color (Auto/Off).

Brightness, Contrast, Gamma, Hue and Chroma Level are

Language settings

set to 0 upon purchase.

Audio Language

Initial Settings parameters

• Change the language when listening to the sound of

• The player's detailed settings can be changed here.

DVD-Video discs (English/available languages/Other

• Initial Settings cannot be selected during playback.

Language).

Subtitle Language

Digital Audio Out settings

• Change the language of the subtitles displayed for

HDMI Out (DV-3022KV/DV-3022V)

DVD-Video discs (English/available languages/Other

• Select the audio signals to be output from the HDMI

Language).

OUT terminal (LPCM (2CH)/Auto/Off) according to the

DVD Menu Lang.

connected HDMI-compatible device.

• Change the language used for the menu displays of

DVD-Video discs (w/Subtitle Lang./available languages/

Other Language).

Cleaning the lens

About trademarks

The player's lens should not become dirty in normal use,

but if for some reason it should malfunction due to dust

or dirt, consult your nearest Pioneer authorized service

center. Although lens cleaners for players are commercially

available, we advise against using them since some may

damage the lens.

About copyrights

 HDMI, the HDMI Logo and High-Definition Multimedia

This item incorporates copy protection technology that is

Interface are trademarks or registered trademarks of

protected by U.S. patents and other intellectual property

HDMI Licensing, LLC in the United States and other

countries.

rights of Rovi Corporation. Reverse engineering and

disassembly are prohibited.

Language Code Table

Handling discs

Language names (codes) an input codes

Storing

Japanese (ja), 1001

Bhutani (dz), 0426

English (en), 0514

Esperanto (eo), 0515

 Always place discs in their cases and store them

French (fr), 0618

Estonian (et), 0520

vertically, avoiding places hot, humid, exposed to direct

German (de), 0405

Basque (eu), 0521

sunlight and extremely cold.

Italian (it), 0920

Persian (fa), 0601

 Be sure to read the cautions included with the disc.

Spanish (es), 0519

Finnish (fi), 0609

Chinese (zh), 2608

Fiji (fj), 0610

Dutch (nl), 1412

Faroese (fo), 0615

Cleaning discs

Portuguese (pt), 1620

Frisian (fy), 0625

 Discs may not play if there are fingerprints or dust on

Swedish (sv), 1922

Irish (ga), 0701

Russian (ru), 1821

Scots-Gaelic (gd), 0704

them. In this case, use a cleaning cloth, etc., to gently

Korean (ko), 1115

Galician (gl), 0712

wipe the disc from the inside towards the outside. Do not

Greek (el), 0512

Guarani (gn), 0714

use dirty cleaning cloths.

Afar (aa), 0101

Gujarati (gu), 0721

 Do not use benzene, thinner or other volatile chemicals.

Abkhazian (ab), 0102

Hausa (ha), 0801

Afrikaans (af), 0106

Hindi (hi), 0809

Also do not use record spray or antistatic agents.

Amharic (am), 0113

Croatian (hr), 0818

 For tough dirt, apply some water to a soft cloth, wring

Arabic (ar), 0118

Hungarian (hu), 0821

out thoroughly, wipe off the dirt, then wipe off the

Assamese (as), 0119

Armenian (hy), 0825

Aymara (ay), 0125

Interlingua (ia), 0901

moisture with a dry cloth.

Azerbaijani (az), 0126

Interlingue (ie), 0905

 Do not use damaged (cracked or warped) discs.

Bashkir (ba), 0201

Inupiak (ik), 0911

 Do not let the signal surface of discs get scratched or

Byelorussian (be), 0205

Indonesian (in), 0914

dirty.

Bulgarian (bg), 0207

Icelandic (is), 0919

Bihari (bh), 0208

Hebrew (iw), 0923

 Do not place two discs in the disc tray, one on top of the

Bislama (bi), 0209

Yiddish (ji), 1009

other.

Bengali (bn), 0214

Javanese (jw), 1023

 Do not attach pieces of paper or stickers to discs. Doing

Tibetan (bo), 0215

Georgian (ka), 1101

so could warp discs, making it impossible to play them.

Breton (br), 0218

Kazakh (kk), 1111

Catalan (ca), 0301

Greenlandic (kl), 1112

Also note that rental discs often have labels attached to

Corsican (co), 0315

Cambodian (km), 1113

them, and the label's glue may have oozed out. Check

Czech (cs), 0319

Kannada (kn), 1114

that there is no glue around the edges of such labels

Welsh (cy), 0325

Kashmiri (ks), 1119

before using rented discs.

Danish (da), 0401

Kurdish (ku), 1121

Country/Area Code Table

About specially shaped discs

Specially shaped discs (heart-

Country/Area name, Input codes and Country/Area code

shaped, hexagonal, etc.) cannot

United States, 2119, us

be played on this player. Do not

Argentina, 0118, ar

United Kingdom, 0702, gb

attempt to play such discs, as they

Italy, 0920, it

could damage the player.

India, 0914, in

Indonesia, 0904, id

About condensation on discs

Australia, 0121, au

Austria, 0120, at

Water droplets (condensation) may form on the surface of

Netherlands, 1412, nl

discs if they are moved from a cold place (particularly in

Canada, 0301, ca

Korea, Republic of, 1118, kr

winter) into a warm room. Discs may not play normally if

Singapore, 1907, sg

there is condensation on them. Carefully wipe the water

droplets off the surface of the disc before loading it.

Subtitle Display

• Select whether to display subtitles (On) or not (Off).

Display settings

OSD Language

• Change the language of the operation messages (Play,

Stop, etc.) displayed on the TV screen (English/available

languages).

Angle Indicator

• Select whether to display the angle mark on the TV

screen (On) or not (Off).

On Screen Display

• Select whether to display operation messages (Play,

Stop, etc.) on the TV screen (On) or not (Off).

Options settings

Control (DV-3022KV/DV-3022V)

• Select whether to operate the player using the remote

control of the AV component connected using an HDMI

cable (On) or not (Off).

Parental Lock

• Restrict DVD-Video viewing (Password/Level Change/

Country Code).

DivX VOD

• Display the registration code required for playing DivX

VOD files (Activate/Deactivate).

Auto Power Off

• Select whether to turn the power off automatically (On)

or not (Off). When set to On, the power automatically

turns off if no operation is performed for 30 minutes or

more.

Restoring all the settings to the

defaults

While the player is in the standby mode...

Press  STANDBY/ON while pressing .

Use the buttons on the front panel.

 Manufactured under license from Dolby Laboratories.

Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

Kirghiz (ky), 1125

Sinhalese (si), 1909

Latin (la), 1201

Slovak (sk), 1911

Lingala (ln), 1214

Slovenian (sl), 1912

Laothian (lo), 1215

Samoan (sm), 1913

Lithuanian (lt), 1220

Shona (sn), 1914

Latvian (lv), 1222

Somali (so), 1915

Malagasy (mg), 1307

Albanian (sq), 1917

Maori (mi), 1309

Serbian (sr), 1918

Macedonian (mk), 1311

Siswati (ss), 1919

Malayalam (ml), 1312

Sesotho (st), 1920

Mongolian (mn), 1314

Sundanese (su), 1921

Moldavian (mo), 1315

Swahili (sw), 1923

Marathi (mr), 1318

Tamil (ta), 2001

Malay (ms), 1319

Telugu (te), 2005

Maltese (mt), 1320

Tajik (tg), 2007

Burmese (my), 1325

Thai (th), 2008

Nauru (na), 1401

Tigrinya (ti), 2009

Nepali (ne), 1405

Turkmen (tk), 2011

Norwegian (no), 1415

Tagalog (tl), 2012

Occitan (oc), 1503

Setswana (tn), 2014

Oromo (om), 1513

Tonga (to), 2015

Oriya (or), 1518

Turkish (tr), 2018

Panjabi (pa), 1601

Tsonga (ts), 2019

Polish (pl), 1612

Tatar (tt), 2020

Pashto, Pushto (ps), 1619

Twi (tw), 2023

Quechua (qu), 1721

Ukrainian (uk), 2111

Rhaeto-Romance (rm), 1813

Urdu (ur), 2118

Kirundi (rn), 1814

Uzbek (uz), 2126

Romanian (ro), 1815

Vietnamese (vi), 2209

Kinyarwanda (rw), 1823

Volapük (vo), 2215

Sanskrit (sa), 1901

Wolof (wo), 2315

Sindhi (sd), 1904

Xhosa (xh), 2408

Sangho (sg), 1907

Yoruba (yo), 2515

Serbo-Croatian (sh), 1908

Zulu (zu), 2621

Switzerland, 0308, ch

Norway, 1415, no

Sweden, 1905, se

Pakistan, 1611, pk

Spain, 0519, es

Philippines, 1608, ph

Thailand, 2008, th

Finland, 0609, fi

Taiwan, 2023, tw

Mexico, 1324, mx

China, 0314, cn

Brazil, 0218, br

Chile, 0312, cl

France, 0618, fr

Denmark, 0411, dk

Belgium, 0205, be

Germany, 0405, de

Portugal, 1620, pt

Japan, 1016, jp

Hong Kong, 0811, hk

New Zealand, 1426, nz

Malaysia, 1325, my