Pioneer TAD-R1 Manual de servicio - Página 10
Navegue en línea o descargue pdf Manual de servicio para Sistema de altavoces Pioneer TAD-R1. Pioneer TAD-R1 17 páginas.
Imprimir página
1
3.5 ACOUSTIC ABSORBENT
Acoustic absorbent
A
13
6
(Inside)
(Outside)
B
Roll the two acoustic absorbent sheets
together. Make two rolls. Push the rolls
vertically into the two holes of the
reinforcing plate from the bottom.
C
D
9 (x8)
Fold the acoustic absorbent sheet into two
so that it forms a triangle then adhere it with
hot-melt adhesive. Make eight triangles.
Secure them at the four corners of the
openings of the woofers.
E
Roll the acoustic absorbent sheets.
Make two rolls. Push them onto the
front side at the corners between the
reinforcing plate and the side plates.
• SPEAKER SYSTEM Parts List
Mark No.
Description
NSP 1
Acoustic Absorbent (A : NW)
NSP 2
Acoustic Absorbent (B : CORD) SMT1343
NSP 3
Acoustic Absorbent (C)
NSP 4
Acoustic Absorbent (D : CST)
NSP 5
Acoustic Absorbent (CST)
NSP 6
Acoustic Absorbent (D : CST)
F
NSP 7
Acoustic Absorbent
(CST/Cab Bottom)
NSP 8
Acoustic Absorbent (CST Side) SMV2233
10
1
2
Cover the whole reflector with the
acoustic absorbent sheet
(triangular shape).
Fold the acoustic absorbent sheet
into four so that it forms a triangle
and fully push it into the head.
Place the acoustic absorbent sheet
along the curve of the upper plate
of the head. Pull the sheet toward
you and drape it over the rear side
of the baffle.
4
Adhere the acoustic absorbent sheet to
the underside of the top reinforcing plate
12
with hot-melt adhesive. Align two slashes
of the sheet with the holes on the plate.
11
10, 11
Twist the acoustic absorbent sheets
around the designated parts of the
reinforcing plates and tie them with
the banding bands.
10
Part No.
SMT1342
SMT1344
SMT1345
SMT1346
SMT1351
SMV2232
TAD-R1
2
3
7
5
Push the acoustic absorbent
sheet lightly from the opening
of the CST unit.
Area for the LPF NW Assy
1
10
15
2
1-3
Insert the acoustic absorbent sheets between two reinforcing
plates and place them along the side plates.
7
Bend the acoustic absorbent sheet into an L-shape and
place it at the corner between the rear plate and the
bottom plate. Be careful not to let the sheet cover the duct.
14
Adhere the acoustic absorbent sheet to the
side panels with hot-melt adhesive.
Be careful not to let the acoustic
absorbent sheet cover the duct.
Mark No.
Description
NSP 9
Acoustic Absorbent (WF Corner)SMV2234
NSP 10
Acoustic Absorbent (Cab)
NSP 11
Acoustic Absorbent (Cab)
NSP 12
Acoustic Absorbent (Cab CST Under)SMV2237
NSP 13
Acoustic Absorbent (SCT Rear) SMV2238
NSP 14
Acoustic Absorbent
NSP 15
Wire Tie 300mm
3
4
7
8
Place the acoustic absorbent
sheets along the bottom and
side plates of the chamber.
5
Fold the acoustic absorbent sheet into
four and roll it. Make two rolls. Then push
them into both sides of the chamber.
3
Holes on the rear panel
of the cabinet
Part No.
SMV2235
SMV2236
SMV2240
SEP6024
4