Dinex DXSU2T1D10 Manual de funcionamiento y mantenimiento - Página 3
Navegue en línea o descargue pdf Manual de funcionamiento y mantenimiento para Mobiliario interior Dinex DXSU2T1D10. Dinex DXSU2T1D10 19 páginas. Tq supreme quiet series cart
Imprimir página
GENERAL INFORMATION
MANEUVER THE CART
The cart has been designed to be easy to maneuver. To lower the push
pull effort it is recommended you push the cart from the handle side using
the horizontal or vertical push handles.
!
ATTENTION: It is not recommended to pull the cart
LOCK THE CASTERS
As standard, 2 of the 4 casters come with a brake. First, make sure the
brake is accessible and not below the bumper. The brake should be
facing outside so it is easier to lock. Then, engage the brake with your
foot and lock it. To disengage the brake press on the top of the brake with
your foot.
!
ATTENTION: Only lock and unlock the brake with the foot. It is not
recommended to unlock the brake with your hand.
LOCK THE CASTERS
After the cart has been cleaned and sanitized, the water can be
evacuated by pulling the drain off.
!
ATTENTION: Once the cart is dry, make sure that the drain is put back
in position ensuring a tight fit.
GENERAL INFORMATION
REMOVE RACK
Place one hand on rack and lift up on locking bracket lever and pull rack
clear from bracket (red arrow). Repeat this action on other side and rack
should fall away from inside wall of cart. Lift rack off of pins and remove
from inside of cabinet. Repeat process for each rack.
INSTALL RACK
Slide rack into cabinet at a 20 degree angle away from side wall so you can
clearly see the bottom holes of rack. Line up holes on cone pins and let rack
slide down on pins till they stop. The cone pins are marked with the tray size:
14x18" or 15x20".
Push rack towards cabinet wall until rack locks into place on both locking
brackets. Rack should not be able to be pulled free easily when rack is locked
into place.
TQ SUPREME Cart | 3