Dinex DXSU2T1D10 운영 및 유지보수 매뉴얼 - 페이지 3

{카테고리_이름} Dinex DXSU2T1D10에 대한 운영 및 유지보수 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dinex DXSU2T1D10 19 페이지. Tq supreme quiet series cart

GENERAL INFORMATION

MANEUVER THE CART

The cart has been designed to be easy to maneuver. To lower the push

pull effort it is recommended you push the cart from the handle side using

the horizontal or vertical push handles.

ATTENTION: It is not recommended to pull the cart

LOCK THE CASTERS

As standard, 2 of the 4 casters come with a brake. First, make sure the

brake is accessible and not below the bumper. The brake should be

facing outside so it is easier to lock. Then, engage the brake with your

foot and lock it. To disengage the brake press on the top of the brake with

your foot.

ATTENTION: Only lock and unlock the brake with the foot. It is not

recommended to unlock the brake with your hand.

LOCK THE CASTERS

After the cart has been cleaned and sanitized, the water can be

evacuated by pulling the drain off.

ATTENTION: Once the cart is dry, make sure that the drain is put back

in position ensuring a tight fit.

GENERAL INFORMATION

REMOVE RACK

Place one hand on rack and lift up on locking bracket lever and pull rack

clear from bracket (red arrow). Repeat this action on other side and rack

should fall away from inside wall of cart. Lift rack off of pins and remove

from inside of cabinet. Repeat process for each rack.

INSTALL RACK

Slide rack into cabinet at a 20 degree angle away from side wall so you can

clearly see the bottom holes of rack. Line up holes on cone pins and let rack

slide down on pins till they stop. The cone pins are marked with the tray size:

14x18" or 15x20".

Push rack towards cabinet wall until rack locks into place on both locking

brackets. Rack should not be able to be pulled free easily when rack is locked

into place.

TQ SUPREME Cart | 3