Aeotec MultiSensor Instrucciones de instalación

Navegue en línea o descargue pdf Instrucciones de instalación para Accesorios Aeotec MultiSensor. Aeotec MultiSensor 3 páginas. Z-wave 4-in-1 sensor: motion, temperature, humidity, and light sensor
También para Aeotec MultiSensor: Manual del usuario (10 páginas)

Imprimir página

MultiSensor

(Z-Wave 4-in-1 Sensor:

Motion, Temperature, Humidity, and Light Sensor)

Introduction:

The Aeotec MultiSensor is a USB or battery-powered

Z-Wave motion sensor, temperature sensor, humidity

sensor, and lighting sensor all in one package. The

sensor will send radio signals to up to 6 associated

Z-Wave devices within its own Z-Wave network when

the Motion Sensor detects IR changes in front of its

viewing window.

Indoor/Outdoor functional tolerances allow the Aeotec

MultiSensor to function under weatherized conditions.

Various sensitivity levels can be configured to avoid

unintentional triggering from small animals such as cats

and dogs.

By taking advantage of the Z-Wave mesh network,

commands can be routed to their destination via

intermediary "listening" Z-Wave products. Products that

are Z-Wave certified can be used and communicate with

other Z-Wave certified devices.

Package Contents:

1) MultiSensor

2) Back-Mount Plate

3) Back-Mount Arm

4) AAA Batteries (x4)

5) USB Cable

6) Screws (x2)

Important Disclaimer:

This product uses radio to wirelessly communicate

data between itself and other devices. Radio

communication is inherently not always 100%

reliable, and as such, this product should not be

used in situations in which life and/or valuables are

solely dependent on its function.

Technical Specs

· MultiSensor Physical Instructions:

Lock/Unlock

Half-Dimple

Markers

Motion Sensing

Window

LED

Sensitivity Knob

Temperature/

Humidity Sensor

Z-Wave Button

USB Power Port

Back Mount Hook

Back Mount Plate

Battery Holder

Back Mount Arm

Friction Lock

· MultiSensor Power Instructions:

The Aeotec MultiSensor has built in battery level detection. It will

automatically report its battery level to the associated gateway

throughout its life until the battery is fully drained and needs

replacing. The battery status will often be displayed in the user

interface of the gateway.

When used properly in an optimized Z-Wave network, operation via

battery can function for 12 months before battery replacement.

Unlock the MultiSensor from it's battery cover by twisting the

battery cover from the main unit in a counter-clockwise motion

and pulling the battery cover outward to separate the main unit

from the battery cover.

Battery Cover

Main Unit

Unlocked

Sensitivity

Insert 4 AAA batteries oriented

according to the picture located

AAA

in the battery holder (with the

negative end depressing the

battery spring).

AAA

Lock the MultiSensor main unit to its battery cover by aligning

the Lock/Unlock Half-Dimple Markers under the "unlock"

symbol and twisting the battery cover from the main unit in a

clockwise motion until the Lock/Unlock Half-Dimple Markers

form a circle under the "lock" symbol (a tangible click will be

felt).

Battery Cover

Locked

Main Unit

Recommendation: For networks which do not have a method to

display the battery level of the Aeotec MultiSensor, it is

recommended that the sensor be tested occasionally to ensure

that the battery still hold enough charge to operate. Batteries

naturally lose their charge over time.

· Motion Sensor Effective Range:

Celling

10 meters

Wall

· Weatherization Orientation:

Water can enter

humidity sensor

CORRECT

WRONG

· MultiSensor Physical Installation Instructions:

There are 2 methods to physically mount the MultiSensor on the

wall or ceiling. It can be mounted flat against the wall via the

Back-Mount Plate or angled in a direction via the Back-Mount Arm.

Important: The MultiSensor is weatherized and can operate

outdoors in rain and snow. Placed outdoors where directly exposed

to rain and snow, the MultiSensor should be oriented such that the

Temperature/Humidity Sensor is facing downward and positioned

on the bottom of the unit. (See the Weatherization Orientation

section.)

Mounting the MultiSensor flat against the wall via the

Back-Mount Plate.

Back Mount Plate

Mounting the MultiSensor angled in a direction via the

Back-Mount Arm.

Back Mount Arm

3 meters

Ground

Tighten/Loosen

Friction Lock

Back Mount Plate

Note: The Back-Mount Arm may be locked in various angles by

turning the Friction Lock clockwise and counter-clockwise to

tighten or loosen (respectively) the angle of the arm.

Recommendation: For best performance, the MultiSensor should

NOT be mounted directly on or near metal framing or other large

metallic objects. Large metal objects may weaken the radio signal

transmitted.

· Adjusting the Sensitivity on the MultiSensor

Turn the Sensitivity Knob in a clockwise direction to increase

sensitivity and counter-clockwise to decrease sensitivity.

Ground

Sensitivity Knob

Sensitivity

AAA