Aeotec ZW187 Manual - Página 7
Navegue en línea o descargue pdf Manual para Accesorios Aeotec ZW187. Aeotec ZW187 11 páginas. Recessed door sensor gen7
También para Aeotec ZW187: Manual del usuario (9 páginas)
Imprimir página
Security Class
SmartStart Compatible
Over The Air (OTA)
Multi Channel Device
Association
Factory Reset
Power-down Memory
Timed battery report
Low battery warning
Sensor State Report
Control other device
AEOTEC Engineering Specification
Non-Security, S0, S2 Unauthenticated, and S2 Authenticated
Support. After powering on, SmartStart is auto activ ated if it 's out of the Z-Wave network.
Support. Firmware can be updated via RF.
No
Support. Refer to Section 4.7 Association Group Info.
Support. Refer to Section 3.6 How to factory reset.
Support. All command settings will stay unchanged even power down.
Support. Refer to Configuration Parameter 101.
Support. Refer to Configuration Parameter 90.
Support. When Magnet is away or near, send out notification via Group 1 .
Support. When Magnet is away or near, control other Z -Wave device directly via Group 2.
Page 3