Aeotec Nano Switch Manual del usuario - Página 15

Navegue en línea o descargue pdf Manual del usuario para Interruptor Aeotec Nano Switch. Aeotec Nano Switch 18 páginas. Nano switch

Automatic reports are sent to association group 1,

which is setup via the Association Command Class.)

Please consult the operation manual for these

control points for specific instructions on monitoring

the Nano Switch.

Note: The model ZW139 Nano Switch does not

have the ability to monitor energy consumption. The

model ZW116 Nano Switch supports the energy

metering feature and you can see the words "with

Energy Metering" on its packaging box.

Security or Non-security feature of your Nano

Switch in Z-Wave network.

Including Nano Switch as a non-secure device:

If you want your Nano Switch as a non-secure

device in your Z-Wave network, press the Action

Button once on Nano Switch when you pair it to

your gateway. If inclusion is successful, the green

LED will be on for 2 seconds, and then return to a

solid indication. If inclusion is unsuccessful, the red

Note: This is the physical connection diagram for

AC120V/230V power input.

Mounting the gang box.

Position all wires to provide room for the

device. Place the Nano Switch inside the gang

box towards the back of the box.

Position the antenna towards the back of the

box, away from all other wiring.

Reinstall the Nano Switch to the gang box.

Reinstall the cover onto the gang box.