Aeotec NanoMote Quad Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Domótica Aeotec NanoMote Quad. Aeotec NanoMote Quad 10 páginas.
También para Aeotec NanoMote Quad: Manual del usuario (9 páginas), Manual de inicio rápido (5 páginas), Manual de instrucciones (9 páginas)
Imprimir página
1. Insert the LIR2450 battery.
2. Place the device within the direct range of your Z-Wave controller.
3. Set the main controller's adding mode (see the controller's manual).
4. Double click the button quickly, the LED indicator should blink fast.
5. Wait for the adding process to end.
6. Successful adding will be confirmed by the Z-Wave controller's message.
TIP:
If you want your NanoMote Quad to be a security device that use
!
secure/encrypted message to communicate in a Z-Wave network, then a security
enabled Z-Wave controller is
Ⅳ. Z-WAVE NETWORK EXCLUSION
To remove the NanoMote Quad from the Z-Wave network:
1. Insert the LIR2450 battery.
2. Place the device within the direct range of your Z-Wave controller.
3. Set the main controller remove mode (see the controller's manual).
4. Double click the button quickly, the LED indicator should blink fast.
5. Wait for the removing process to end.
6. Successful adding will be confirmed by the Z-Wave controller's message.
V .Security features of NanoMote Quad in Z-Wave network
7. The following is a list of supported command classes:
8. 1.The node info frame supports:
COMMAND_CLASS_ZWAVEPLUS_INFO
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_TRANSPORT_SERVICE
2. Security Command Supported Report Frame:
COMMAND_CLASS_VERSION
COMMAND_CLASS_MANUFACTURER_SPECIFIC
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_ASSOCIATION
COMMAND_CLASS_BATTERY
COMMAND_CLASS_WAKE_UP
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_CONFIGURATION
COMMAND_CLASS_SUPERVISION
needed.
V2
V1
V1
V2
V2
V2
V1
V2
V1
V2
V1
V1
V1