Aeotec NanoMote Quad 운영 매뉴얼 - 페이지 4

{카테고리_이름} Aeotec NanoMote Quad에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Aeotec NanoMote Quad 10 페이지.
Aeotec NanoMote Quad에 대해서도 마찬가지입니다: 사용자 설명서 (9 페이지), 빠른 시작 매뉴얼 (5 페이지), 운영 매뉴얼 (9 페이지)

페이지 인쇄

1. Insert the LIR2450 battery.

2. Place the device within the direct range of your Z-Wave controller.

3. Set the main controller's adding mode (see the controller's manual).

4. Double click the button quickly, the LED indicator should blink fast.

5. Wait for the adding process to end.

6. Successful adding will be confirmed by the Z-Wave controller's message.

TIP:

If you want your NanoMote Quad to be a security device that use

secure/encrypted message to communicate in a Z-Wave network, then a security

enabled Z-Wave controller is

Ⅳ. Z-WAVE NETWORK EXCLUSION

To remove the NanoMote Quad from the Z-Wave network:

1. Insert the LIR2450 battery.

2. Place the device within the direct range of your Z-Wave controller.

3. Set the main controller remove mode (see the controller's manual).

4. Double click the button quickly, the LED indicator should blink fast.

5. Wait for the removing process to end.

6. Successful adding will be confirmed by the Z-Wave controller's message.

V .Security features of NanoMote Quad in Z-Wave network

7. The following is a list of supported command classes:

8. 1.The node info frame supports:

COMMAND_CLASS_ZWAVEPLUS_INFO

COMMAND_CLASS_SECURITY

COMMAND_CLASS_SECURITY_2

COMMAND_CLASS_TRANSPORT_SERVICE

2. Security Command Supported Report Frame:

COMMAND_CLASS_VERSION

COMMAND_CLASS_MANUFACTURER_SPECIFIC

COMMAND_CLASS_ASSOCIATION_GRP_INFO

COMMAND_CLASS_ASSOCIATION

COMMAND_CLASS_BATTERY

COMMAND_CLASS_WAKE_UP

COMMAND_CLASS_POWERLEVEL

COMMAND_CLASS_CONFIGURATION

COMMAND_CLASS_SUPERVISION

needed.