Whirlpool 6AWTW5700XW1 Manual de uso y mantenimiento - Página 6

Navegue en línea o descargue pdf Manual de uso y mantenimiento para Lavadora Whirlpool 6AWTW5700XW1. Whirlpool 6AWTW5700XW1 20 páginas. Top-loading high efficiency low-water washer

Imprimir página

SPIN SPEED

This washer automatically selects the spin speed

based on the cycle selected. The preset speeds can be

changed. Not all spin speeds are available with all cycles.

• Faster spin speeds mean shorter dry times, but may

increase wrinkling in your load.

• Slower spin speeds mean less wrinkling, but will leave

your load more damp.

EST TIME REMAINING DISPLAY

The Estimated Time Remaining display shows the time

required for the cycle to complete. Factors such as load size

and water pressure may affect the time shown in the display.

Overloading, unbalanced loads, or excessive suds may

cause the washer to adjust the cycle time, as well.

NOTE: Not available on Model 6AWTW5550XW1

CYCLE OPTIONS

You may also add or remove options for each cycle. Note

that not all options can be used with all cycles, and some

are preset to work with certain cycles.

DEEP CLEAN

This option provides enhanced cleaning action for tough

stains and full loads. It will add additional agitation and

soak time to the cycle, enabling larger loads to have time

to move.

DELAY WASH

If you would like to set your washer to start at a preferred

time, select the Delay Wash option. You can use this

option to delay start of a wash cycle for up to 9 hours

(depending on model). Press DELAY WASH button once

to delay 1 hour. If you want a longer delay period, press

and hold the button until your desired delay time (in hours)

shows in the Estimated Time Remaining display, up

to 9H. Then press START/Pause/Unlock to set the delay.

The countdown to the wash cycle will show in the

display window.

ECOBOOST

The EcoBoost option allows you to increase your energy

savings on your wash cycles. When this option is used,

the wash cycle will use slightly cooler wash water than

the selected temperature. The indicated temperature will

not change.

PRESOAK

Use this option to add an extra soak period to any cycle

when washing heavily soiled garments. You can adjust the

length of the soak period by changing the Soil Level.

EXTRA RINSE

This option can be used to automatically add a second

rinse to most cycles.

NOTE: If you use cold wash and "HE" powdered

detergents we recommend to select this option to avoid

detergent residue on you clothes.

FABRIC SOFTENER

This option must be selected if using fabric softener

during a cycle. It ensures that fabric softener is added

at the correct time in the rinse for even distribution.

CYCLE SIGNAL

Use this option to adjust volume of the signal that sounds

at end of cycle. You may select Loud, Soft, or Off (no

indicator lit). A louder signal is helpful in removing items

as soon as cycle is complete.

To turn button sounds on or off (on some models):

Press and hold Cycle Signal for 3 seconds to turn the

button sounds off or on.

NOTE: Not all options are available on

Model 6AWTW5550XW1

CYCLE STATUS LIGHTS

The Cycle Status Lights shows the progress of a cycle. At

each stage of the process, you may notice sounds or pauses

that are different from traditional washers.

SENSING

When the START/Pause/Unlock button is pressed,

the washer will first perform a self-test on the lid lock

mechanism. You will hear a click, the basket will make

a slight turn, and the lid will unlock briefly before

locking again.

Once the lid has locked the second time, the washer

will slowly spin the dry load to estimate the load size and

amount of water needed, and begin adding water. The

washer will then move the load briefly, pause to allow

water to soak into the load, and resume adding water.

This process may repeat until the correct amount of

water has been added for the load. You may also hear

water flowing through the dispenser, adding detergent

to the load.

NOTE: The sensing light may also come on during the

Soak and Wash portions of the cycle. This is normal.

SOAK

This portion of the cycle allows water to soak into the load

for optimal cleaning.

NOTE: Not available on Model 6AWTW5550XW1

WASH

You will hear the washplate moving the load. Unlike

traditional washers, the load is not covered with water.

Low-water cleaning means concentrated cleaning.

Rather than diluting detergent as done in an agitator-style

washer, this washer delivers the detergent directly to the

soils. The motor sounds may change at different stages

in the cycle. The wash time is determined by the selected

soil level.

RINSE

You will hear sounds similar to the wash cycle as the

washer rinses and moves the load. Fabric softener will be

added if the Fabric Softener option was selected. Some

cycles use spray rinsing.

SPIN

The washer spins the load at increasing speeds for proper

water removal, based on the selected cycle and spin

speed.

DONE

Once the cycle is complete, this light will come on.

Remove the load promptly for best results.

LID LOCK

To allow for proper load sensing and spinning,

the lid will lock and the Lid Lock light will turn

on. This light indicates that the lid is locked

and cannot be opened.

If you need to open the lid, press

START/Pause/Unlock. The lid will unlock

once the washer movement has stopped.

This may take several minutes if the load

was spinning at high speed. Press

START/Pause/Unlock again to resume

the cycle.